|
Post by phillymark on May 15, 2011 19:15:22 GMT -5
Hey everyone! Not only am I new to this board and this is my first post. I'm also new to the trike scooter thing!
I just bought an Ice Bear PST150-11. The bike came on Thursday put together. Have been riding around where I live waiting for the paperwork so I can have it taged.
I question hope some can help!
The bike at night is REALLY dark hard to see. I'd like to install LED rope lighting around the base of the bike. Does anyone know if there is a max volt for a draw on these bikes.
The lights do not use much! However, I'd like to put them around the rear fenders, underside center of the bike and the front fender the complete underside of the bike is lit up.
Thanx for any help in advance!
|
|
|
Post by leeinark on May 15, 2011 19:26:20 GMT -5
Philleymark: You do not have a lot of extra power to spare...I speak from experience. Thankfully LEDS use very little power. If you look thru my posts on the trike section there has been a lot of info posted about LED extra lights. I'm running several LED types on mine. From the factory my trike was not producing enough electrical power to keep the battery charged IF I RAN WITH THE HEADLIGHTS ON.
|
|
|
Post by new2scooten on Jun 4, 2011 23:19:52 GMT -5
hi jim here i have 2 -18" led strips on my scoot they work great no battery problems
|
|