Where to find taller windshield for Magnum?

[beejcctx]

Greetings,

I followed a thread here about a 150cc trike that found a taller windshield - however the link in the posting is now no longer working at the vendor.

So, any ideas? Links? Much appreciated!

THANKS!

-- Bev in TX

[rapidjim]

To my knowledge a driect fit taller windshield for the IB trikes is not available. Best to make one.

Jim/Owner
Rapid Repair

[beejcctx]

Thanks Jim - that windshield on the 300 cc magnum trike is just a wee bit too short for me.

-- Bev in TX

[jonglauser]

I made a replacement windshield for my scooter. Bought Polycarbonate from Home Depot, traced the old (broken) one onto it, made some minor changes (slightly shorter, more angle to it). Then cut and drill as needed to mount it up. cost much less than buying a replacement which would have cracked again eventually. Dont use plexiglass, it's acrylic and will be brittle. Polycarbonate is what they make bullet proof glass (and pop bottles) from.

[mike6736]

I installed a universal 50 slip mount on my Magnum..Required removal of original shield. I have risers on mine and now shield is over my head, lost 5-7 miles of top end..I like

Mike

[beejcctx]

Jon and Mike - appreciate both replies - will look for Polycarbonate from my local HD.

THANKS!

-- Bev in TX

[edfr]

This one fits the 150 PST150H Ice Bear Trike like it was made for it. If your front end looks like the PST150H Ice Bear Trike its a perfect fit.
Lefty
www.premiercycleaccessories.com/GIVI_Honda_Reflex_250_01_08_Windshield_D211ST_p/gv-d211st.htm

[mike6736]

Bev, The one I have you can order and install yourself. Is a universal 50 slip mount.

Mike

[Brooster]

laminarlip.com/ has windscreen extensions.