|
Post by quelle50 on Apr 30, 2011 14:50:26 GMT -5
i have a 50cc installed a big bore kit. started fine for about a month. Then it got harder to start now, nothing at all. new plug new ignition coil. any suggestions?
|
|
|
Post by felliott on Apr 30, 2011 21:37:18 GMT -5
Have you checked for spark? Readjust the valves to make sure they have not tightened up.
|
|
|
Post by edfr on May 1, 2011 11:36:54 GMT -5
Sure sounds like the Valves tightened up on you. Lefty
|
|
|
Post by quelle50 on May 2, 2011 21:26:27 GMT -5
should the "fuel pump" constantly drip gas? I have taken it off the carb while not running, and fuel trickles out. could that be the problem? and if it is the vavles, how would i go about fixing that.
|
|
|
Post by D-cat on May 3, 2011 7:04:27 GMT -5
|
|
|
Post by quelle50 on May 18, 2011 14:21:38 GMT -5
Ok. i bought a new head, petcock, and rocker arms, and it still wont spark. It's getting gas, and sparks fine. I'm at the end of my rope, and funds.
|
|
|
Post by quelle50 on May 18, 2011 19:02:55 GMT -5
Scratch the last post. adjusted the valves, starts and runs. Thank you all for the help. I really appreciate the info. No more riding the bus sitting next to stinky people. Although i will miss the time to read. YOU GUYS ROCK!
|
|