Post by MC95250 on Apr 20, 2011 12:00:36 GMT -5
How to change transmission oil MC-95-250. There are two hex plugs in the bottom of the trans but nothing above them or on the side to allow willing with new oil. The owners manual only shows the engine oil changing details. HELP
Just got a new and upgraded MC-95-250 4-15-2011. I have not had any stability problems, it drives like a four wheeler. Apparently the new Manufacture incorporates all of the fixes. My dealer (Thrifty Scoters) recommended I have the scooter delivered to the freight terminal as most of the fright damage happens from the terminal and the delivery company which are often second party contractors. My machine was shipped by UPS fright and was packaged well and rapped in clear plastic which allowed me to check for damage with out have to take the box apart. They loaded it on my ( borrowed ) trailer and home I went. Unpacking was a snap. Removed the clear plastic, cut the tie down wires (4) remove 2 board and rolled the scooter off. Taking crate apart was and disposing of took the time.
No problems getting the scooter registered in Mississippi. Got the plats, Inspection sticker and insurance (geico 1 year $99.00) all in the same day.
Problems encountered out of the box.
1. Had to remove the plastic on the handle bars to adjust the hand brake to in stall the right hand mirror.
2. Speedometer did not work. The plug in located at the base of the back wheel was not connected. Nothing about this in owners manual.
3. Hose clamps are junk. Installed new stainless steel clamps and replace the water with 50/50 coolant.
4. Check ALL Bolts and lock-tight all vital bolts. (was recommended by my dealer)
Just got a new and upgraded MC-95-250 4-15-2011. I have not had any stability problems, it drives like a four wheeler. Apparently the new Manufacture incorporates all of the fixes. My dealer (Thrifty Scoters) recommended I have the scooter delivered to the freight terminal as most of the fright damage happens from the terminal and the delivery company which are often second party contractors. My machine was shipped by UPS fright and was packaged well and rapped in clear plastic which allowed me to check for damage with out have to take the box apart. They loaded it on my ( borrowed ) trailer and home I went. Unpacking was a snap. Removed the clear plastic, cut the tie down wires (4) remove 2 board and rolled the scooter off. Taking crate apart was and disposing of took the time.
No problems getting the scooter registered in Mississippi. Got the plats, Inspection sticker and insurance (geico 1 year $99.00) all in the same day.
Problems encountered out of the box.
1. Had to remove the plastic on the handle bars to adjust the hand brake to in stall the right hand mirror.
2. Speedometer did not work. The plug in located at the base of the back wheel was not connected. Nothing about this in owners manual.
3. Hose clamps are junk. Installed new stainless steel clamps and replace the water with 50/50 coolant.
4. Check ALL Bolts and lock-tight all vital bolts. (was recommended by my dealer)