|
|
Post by kensworld5 on Apr 4, 2011 10:34:00 GMT -5
Greetings, Has anyone used the harbor freight motorcycle lift #99887 for big scooters. See the lift here. www.harborfreight.com/high-position-motorcycle-lift-99887.htmlI plan on building a platform, (in stock materials), which the lift can go under and lift the scooter 30 inches. The plastic cover under the MC-54-250B looks like using the forks directly, (approx. 20" apart), is not an option. The unit will cost me $152 OTD. I would love to have their lift table #91764, but at $500, forget it. Any feedback is appreciated. Ken |
|
|
|
Post by Jeff on Apr 4, 2011 13:29:19 GMT -5
Has pretty good reviews on their website. We would no doubt need some sort of platform, but I also wonder what the straps can wrap around with all the tupperware in the way. I'm also wondering where I would store it out of the way when not in use, I should go look at one in the local store.
|
|
|
|
Post by kensworld5 on Apr 5, 2011 8:40:51 GMT -5
Here are the results of the lift project. Works great. See attached. Ken Attachments:
|
|
|
|
Post by Jeff on Apr 5, 2011 10:04:01 GMT -5
Wow, that really gets higher than I thought it would. Very handy to have for $150. I'm tempted to pick one up. There is a 20% off coupon on their web site that seems to expire today, or do they always have that coupon available?
|
|
|
|
Post by kensworld5 on Apr 5, 2011 13:03:03 GMT -5
check on line. there is usually one available somewhere. read the fine print for expiration date and conditions. Ken
|
|
|
|
Post by saoul on Apr 6, 2011 16:33:13 GMT -5
WOw! Now I have to get one. It would make working on my scoot a lot easier! Hmmmm... and there is a store not even 2 miles from here. THANKS for the pics and the info!!!!
|
|
|
|
Post by mrmike on Dec 31, 2012 19:19:24 GMT -5
Kensworld5
Thanks for this idea. I just bought a Kymco 300GTI and this lift will be great for this old (68) man to change oil etc. I will also build a wood frame to lift my lawn mowers and snow blower. Pictures were great.
|
|
|
|
Post by snugglebunny on Dec 31, 2012 19:39:36 GMT -5
there is a thread sorta like this one came up on a diff forum a few years ago.
so i built my own.
drive up on, pull forward, into a 'chock', put her on center stand
and BLAMO up on a cheap home made lift.
think total cost of materials was $100
and just my time , which i have tons of
|
|
|
|
Post by shalomdawg on Dec 31, 2012 21:50:47 GMT -5
howdy, i had the lift you mentioned and was entirely pleased with it except it didn't lift quite high enough. that could be remedied i'm sure. i did see one that had a leaky cylinder. i think the problem is caused by pumping it after it hits the top and that blows the seal out on the cylinder.
lotsa miles and smiles to ya
|
|
|
|
Post by skuttadawg on Jan 1, 2013 0:07:39 GMT -5
I have been looking at this too . Please let us know how it works for you
|
|
|
|
Post by mrmike on Jan 1, 2013 8:19:47 GMT -5
Snugglebunny
Could you post some pics. I putter with woodworking, and probably could make my own also.
|
|
|
|
Post by rockynv on Jan 2, 2013 21:35:15 GMT -5
Just remember to adjust the center of the platform on the lift to compensate for the scooter being back heavy. Rear riders foot pegs are what I use to strap mine down on carriers and would work well on lifts also.
|
|
|
|
Post by jonvolks on Jan 3, 2013 3:53:54 GMT -5
I bought that lift about 2 weeks ago but haven't had a chance to use it yet. I'm hoping to be able to use it with out a platform. I like the idea of lifting with tires off the ground. That way I can work on the tires or wheels as needed. I guess if need be I can build a platform like he did.
|
|
|
|
Post by rockynv on Jan 3, 2013 4:26:36 GMT -5
Usually not enough room between the belly pan and the rear wheel on a scooter to make that work. Those lifts usually work that way on old style unfaired cruiser, chopper or dirt bikes.
|
|
