|
|
Post by ryan_ott on Jul 2, 2006 22:15:10 GMT -5
What size main jet does the rx200hp come with? I thought it was a 107 but I just looked at mine and its a 200. What size is needed to add a uni filter.
|
|
|
|
Post by Jacine on Jul 2, 2006 22:52:42 GMT -5
What is the carburetor make?. A 200? is extremely high. What size is the slow jet?
|
|
|
|
Post by ryan_ott on Jul 3, 2006 5:53:29 GMT -5
its a cardium (sp) is what I remember being stamped on the side. I dont see a number on the low jet
|
|
|
|
Post by Admin on Jul 3, 2006 8:00:10 GMT -5
I don't believe that word is the brand of carb. It's an aluminum alloy. That's the same carb that is on the rx150i. I don't know anything about it other than PSF told me it was a 26mm carb.
|
|
|
|
Post by Jacine on Jul 3, 2006 9:58:09 GMT -5
Apparently the Rx200 is a 150cc engine that has been modified for 200HP which means that you can expect to have a larger main and idle jet from stock. The 200 main jet apparently is factory. I wonder what other hp mods were made from the Rx150. Apparently the carb is a larger 26 mm corundum, whereas the standard 150 is using the 24mm walbro.
|
|
|
|
Post by ryan_ott on Jul 3, 2006 15:24:20 GMT -5
what jet should i use w/ a uni filter
|
|
|
|
Post by Admin on Jul 3, 2006 15:41:33 GMT -5
My understanding is that the 150i and the 200hp both use the new GY6-B engine and have the 26mm carb. The only way to know what size the main jet is stock is to pull it and stick round feeler guages through it to determine, unless you contact PSF directly and hope they can tell you. If you do find out, let us know.
|
|
|
|
Post by ryan_ott on Jul 3, 2006 16:27:03 GMT -5
I'll call thanks for the help
|
|
