|
|
Post by aldan on Mar 16, 2011 18:36:01 GMT -5
Thinking of putting a performance CDI... but I can't locate it.
|
|
|
|
Post by edfr on Mar 16, 2011 20:02:27 GMT -5
Aldan,
It should be mounted on the Frame almost straight across the air filter. It is actually on the outside of the frame. You can probably get to it better from under the Right side panel straight up by where the Oil Fill Plug is at. Or you can follow your Coil Wire the wires plugged into it come from the CDI.
Lefty
|
|
|
|
Post by aldan on Mar 17, 2011 19:02:26 GMT -5
That's what I would have thought. The wires from the coil go to the front and I see nothing. Think it's behind the speed o. And i heat taking of those plastic parts......thin tabs.........
|
|
|
|
Post by edfr on Mar 17, 2011 20:56:52 GMT -5
BUMMER!! I wonder why they put the CDI all the way up front? Most scoots have them near the Coil itself near the engine.
Lefty
|
|
|
|
Post by triker98304 on Mar 20, 2011 21:10:27 GMT -5
On my Icebear Trike 150-9 the cdi was under the front nose piece. Remove the nose piece and the windshield. As you are facing the trike from the front it was on the left side above the headlight held by a rubber sling around the frame section. Good luck but I am sure you will find it.  Triker98304 |
|
