|
|
Post by leeinark on Mar 10, 2011 16:16:00 GMT -5
ttached is the picture of my rear LED lights. I wish I could do a little movie clip so you could see the full effect. The long ones that are lit up are now in the stop brake mode. They will sequential back and forth when using as running lights. Hit the brake and they flash 3 times before staying on solid (dual intensity) The little LEDs just above the long ones are my turn signal LEDs that only come on when I turn on my turn signals. I'll try to do a little movie clip on my camera and see if I can post it. Attachments:
|
|
|
|
Post by edfr on Mar 10, 2011 16:29:01 GMT -5
Lee my man,
Very Nice indeed, Looks great and always good to have people behind you see
But Load the picturea as 640x480 we have to scroll to see them:)
Lefty
|
|
|
|
Post by leeinark on Mar 11, 2011 7:53:23 GMT -5
yeah Lefty I noticed that after I loaded them up. I'm kind of technically challenged when it comes to this digital camera. I'll do my best. adios!
|
|
|
|
Post by girardmjg on Mar 23, 2011 12:58:43 GMT -5
Where do you buy the kit ?
|
|
|
|
Post by leeinark on Mar 24, 2011 21:07:31 GMT -5
It's not a kit. Custom dynamics
|
|
|
|
Post by skytex on Apr 20, 2011 5:44:38 GMT -5
since this isnt a kit, id love a how to on it. Ive considered something similar for my 150-11
|
|
|
|
Post by leeinark on Apr 20, 2011 7:59:20 GMT -5
Sure: Look up custom dynamicsd on the web. They will send you a catlogue if you wish. There are numerous different kinds and colors so read all of them carefully. Recommend you make a little drawing of how you want it to look. You will need to buy some diodes at radio shack to place inline power side. Then just splice them into the wire of whatever you are using them for IE: directly to brake wire coming off your current configuration. You can buy a simple tester from auto zone, o'reilly's, etc to ensure you are splicing into the correct wire. I used a dual intensity (X2) 7 row LED for my brake and running. It sequentials back and forth for running and when the brake is applied they blink 5 times before coming on high intensity for however long the brake is depressed. I bought 2 more 5 row LEDS that only work on my turn signal input...they too are spliced directly into the factory turn signal wire. You may or maynot need diodes for your application. I recommend you test them first. I had to put diodes on my brake lights only. The LEDS I purchased are double sided tape and hold to the body of my scoot very well. I had to drill two small holes to run the wire thru the body of the scoot and up under the frame to the tail light wiring. Skytex if you take this on I will be glad to help you on the phone if you need a hand, just let me know by PM.
|
|
|
|
Post by leeinark on Apr 20, 2011 8:01:39 GMT -5
Skytex: One correction when I said 7 row I meant 7 inch long...I think they are 21 row of LEDS. Same with 5 row. vr, Lee
|
|
