|
|
Post by strangerdejavu on May 11, 2006 22:10:46 GMT -5
I've been driving my Primo Streaker GT around the past couple days and have noticed that after a bit of riding, the tachometer goes to zero. If I turn off the scoot with the key then turn it back on again, the tach works again (for a while). If I turn it off with the kill switch and back on without turning the key, it continues not to work. This is a new scoot, so it shouldn't have anything to do with age. Any guesses out there what could be wrong and how I should fix it?
|
|
|
|
Post by Admin on May 12, 2006 11:35:10 GMT -5
Wow, that's a stumper. I would check electrical connectors but I'm a certified electrical idiot and that's the first thing I do because I don't know enough to do much else. Stan?
|
|
|
|
Post by strangerdejavu on May 12, 2006 16:58:01 GMT -5
It's also odd because the lights stay on... it's not like the whole thing turns off completely. Those are other wires, I'm sure, and I haven't looked to see if it's all on one connector... But it doesn't make any immediate sense. My own best guess is that there's too low of voltage or something, so it stops workin. Dunno!
|
|
