|
|
Post by idabill on Oct 6, 2010 17:29:18 GMT -5
Well here we go again. My battery is not charging when I'm riding. Had stattor and voltage regulator both checked, both good. I called Superior Power Sports and they turned me onto this number 1-909-947-2903 and ask for Alfredo. He sent me this wiring page. I hope it comes through in the attachment. It was enough for the mechanic to say he would give it a try. Otherwise the trike runs great. BUT my friend who bought one also, and me are starting to see little cracks creeping out from the bolt heads in the fender area. Any suggestions there ? I asked a good body guy if it would do any good to fiber-glass the inside of the fenders. He said if the plastic is to smooth it wont stick. So will have to look into that a little later. So will keep you up-dated to see if things work out. Attachments:
|
|
|
|
Post by als01seville on Oct 6, 2010 17:44:10 GMT -5
Idabill, Can't help you with the wireing but with the cracking fenders here is how I solved that problem. Use pieces of Diamond Aliumium Plate and it spreads the pressure over the entire plate area. Alleyoop  |
|
|
|
Post by idabill on Oct 6, 2010 18:32:52 GMT -5
That looks good Ally, I'm going to give it a try. what thickness, 1/8 th inch?.
|
|
|
|
Post by als01seville on Oct 6, 2010 18:39:21 GMT -5
Idabill, Yes they are 1/8 and very strong, I also think it gives it that PIMPING LOOK  Alleyoop |
|
|
|
Post by idabill on Oct 7, 2010 14:11:31 GMT -5
thanks Allyoop, sure will do that when I get the trike out of the shop.
|
|
|
|
Post by als01seville on Oct 7, 2010 16:32:38 GMT -5
Idabill,
Also put a 1/4 soft weather stripping on the fender holders where the fender hits the metal fender holders. That will silence any rattleing caused by the vibration and the plastic hitting the metal holders. If your like me I just want to hear the engine and muffler so you can tell by those two sounds if your engine is running well.
Alleyoop
|
|
