|
|
Post by discovery on Sept 27, 2010 20:47:01 GMT -5
discovery, I just sold my Velosity that looks just like yours same color the works. Mine had a 72ccBBK Walbro carb w/95 main jet. Yours is very clean. If you go to supermach they have the complete man for that scoot. Have fun beware of other people around you. Bill Thank you BUIDITRIGHT for the link www.supermach.com it helps a lot. Good site and a lot of Info |
|
|
|
Post by discovery on Sept 29, 2010 4:08:15 GMT -5
Here is some photos of the Batt location
|
|
|
|
Post by discovery on Sept 29, 2010 4:10:31 GMT -5
Also took the seat out to see the engine position   
|
|
|
|
Post by discovery on Sept 29, 2010 4:17:05 GMT -5
Nice view of the 50cc 138QMB
|
|
|
|
Post by discovery on Sept 29, 2010 4:23:08 GMT -5
The Carb sits on the top of the lean mean red machine
|
|
|
|
Post by discovery on Sept 29, 2010 4:25:59 GMT -5
The tiny 1.16 gallon gas saver next to the sender unit
|
|
|
|
Post by discovery on Sept 29, 2010 4:29:26 GMT -5
It takes 20 min to get to this point of the engine bay
|
|
|
|
Post by discovery on Sept 29, 2010 4:32:07 GMT -5
Bare look of the Velocity MP50 01 scooter
|
|
|
|
Post by buiditright on Sept 29, 2010 5:19:32 GMT -5
You got a great deal. Mine got almost 120mpg when I first got it.. Than I started to change things and it still got better then 100 mpg.. It was a great little machine just did not have great brakes...
I would of not sold it if it would of had better brakes.. I still have parts for it... Hope you have as much fun on yours as I did mine... It only left me sitting once and that was not really the scoots fought.
Bill
|
|
|
|
Post by discovery on Oct 2, 2010 2:45:22 GMT -5
You got a great deal. Mine got almost 120mpg when I first got it.. Than I started to change things and it still got better then 100 mpg.. It was a great little machine just did not have great brakes... I would of not sold it if it would of had better brakes.. I still have parts for it... Hope you have as much fun on yours as I did mine... It only left me sitting once and that was not really the scoots fought. Bill Yep, it is a great deal so far I have a lot of fun with it and brakes are good. One Question to all of you. How many miles do this Scoots go before they pass out ?  |
|
|
|
Post by discovery on Oct 4, 2010 1:27:46 GMT -5
Bought gear oil Castrol "HYPOY C" SAE 80W-90 for Scooter use.
|
|
|
|
Post by buiditright on Oct 4, 2010 4:04:42 GMT -5
Descovery,
If you take care of that scooter I always use synthetic oil and gear oil. Do not go down hills full throttle to see how fast you can go you could blow a ring or worse. If you run it real hard all the time you can blow a main bearing then you would have to rebuild the complete motor. I had so much fun with mine. I drove it everywhere I once made a 50 mile trip and still wanted to go more,, The first thing I did was to put a set of 6gr dr. pulley sliders in with a performance varator. Also you should get a kevlar belt the stock belts do not hold up well and will leave you sitting..
Bill
|
|
|
|
Post by discovery on Oct 5, 2010 4:37:29 GMT -5
Descovery, If you take care of that scooter I always use synthetic oil and gear oil. Do not go down hills full throttle to see how fast you can go you could blow a ring or worse. If you run it real hard all the time you can blow a main bearing then you would have to rebuild the complete motor. I had so much fun with mine. I drove it everywhere I once made a 50 mile trip and still wanted to go more,, The first thing I did was to put a set of 6gr dr. pulley sliders in with a performance varator. Also you should get a kevlar belt the stock belts do not hold up well and will leave you sitting.. Bill Thanks for the info about the synthetic oils. Next oil change synthetic only in. Here we don't have hills. Once i did 42 mph and that was all about it. I don't go over 20/25 mph. Scoot is used to get me to and back from work as alternative vehicle. Since this August we have to feed the meters in saturday. The scoot is great for parking. Thank you |
|
|
|
Post by discovery on Oct 5, 2010 4:41:25 GMT -5
Gear oil change
|
|
|
|
Post by discovery on Oct 5, 2010 4:44:26 GMT -5
Open the filler hole
|
|
|
|
Post by discovery on Oct 5, 2010 4:47:05 GMT -5
Losen up the drain
|
|
|
|
Post by discovery on Oct 5, 2010 4:51:02 GMT -5
Oil looks clean Fill the tranny with the oil till is comes out the hole. Mine takes 0.12 Liters 
|
|
|
|
Post by buiditright on Oct 5, 2010 4:57:11 GMT -5
Well if that is the case your scoot will last a long time.. If you have ETHANOL (alcohol) in your gas where you live becareful how long you leave your gas in your tank. We are having all kinds of trouble here with scooters and motorcycle fuel systems.
Also a very good thing to do is to change all your fuel hoses with a good quality hose.. The Chinese do not have good rubber hoses and you will see them fall apart with some of the little rubber pieces going into the filter and carb.. Just little things that I have had trouble with the scooters I have worked on and maybe it can help save you money and trouble in the future. I had to find out the hard way.
Bill
|
|
|
|
Post by discovery on Oct 6, 2010 3:46:41 GMT -5
Well if that is the case your scoot will last a long time.. If you have ETHANOL (alcohol) in your gas where you live becareful how long you leave your gas in your tank. We are having all kinds of trouble here with scooters and motorcycle fuel systems. Also a very good thing to do is to change all your fuel hoses with a good quality hose.. The Chinese do not have good rubber hoses and you will see them fall apart with some of the little rubber pieces going into the filter and carb.. Just little things that I have had trouble with the scooters I have worked on and maybe it can help save you money and trouble in the future. I had to find out the hard way. Bill I think that only two gas stations have non ETHANOL gas and both are about 10 miles away, last time i checked. So far the scoot runs good. Should i add something to the gas to make it more stable or leave it as it is? Rubber is good as of last week, but i'll keep in mind to change them when i have time. Thank you for the advice |
|
|
|
Post by discovery on Oct 11, 2010 19:12:52 GMT -5
Some night shots
|
|
|
|
Post by discovery on Oct 21, 2010 14:44:35 GMT -5
Looks cool 
|
|
|
|
Post by discovery on Oct 21, 2010 14:48:20 GMT -5
Infinity
|
|
|
|
Post by discovery on Oct 21, 2010 14:51:55 GMT -5
Left or Right?
|
|
|
|
Post by discovery on Oct 21, 2010 14:55:03 GMT -5
ART
|
|
|
|
Post by monsterGY6 on Oct 27, 2010 23:21:08 GMT -5
$30 what a deal, happy riding  |
|
|
|
Post by cyberbeer65 on Oct 28, 2010 0:12:07 GMT -5
I got rid of all that pulse air injection crap on mine.
|
|
|
|
Post by discovery on Nov 7, 2010 3:07:55 GMT -5
$300 what a deal, happy riding Thank you, happy riding to you too |
|
|
|
Post by discovery on Nov 7, 2010 3:10:29 GMT -5
I got rid of all that pulse air injection crap on mine. Sorry what is "Pulse Air Injection" again? And how do I get rid if it as well? Thank you |
|
|
|
Post by discovery on Nov 7, 2010 3:13:04 GMT -5
Coasting Down Town N.O.
|
|
|
|
Post by discovery on Nov 7, 2010 3:15:56 GMT -5
The Casino
|
|
