|
Post by triker98304 on Aug 4, 2010 0:28:00 GMT -5
Greetings Well I finally got around to installing the performance parts. The new: Coil, CDI, Clutch kit, variator and sliders... Only I can not get the new belt on the variate and clutch... What is the secret? I can not compress the clutch with the new 1500 spring. Any Suggestions??? I only need a few centimeters to get it on. (Guess I'll try eating my Weaties) Anxious to get triking again. Thanks ya-all Triker98304
|
|
|
Post by als01seville on Aug 4, 2010 12:55:09 GMT -5
Hi Triker98304, You have two choices, one take the clutch out and then put the belt on so you can get a good push on the pulleys and then put it back on with the belt already on. The other way is to get two clamps and pull the plate back. Otherwise start doing some pullups and get those muscles built up Alleyoop
|
|
|
Post by triker98304 on Aug 4, 2010 19:41:03 GMT -5
Thanks for the reply Alleyoop, I do not know what I did different today that I did not do last night BUT I got the belt on. What are the torque specs for the clutch and the variator? Almost finished with the up grades. Thanls for all of the help I have received from this group. Tomorrow I will post some pics of the air snorkel I made to adapt to the high flow air filter. It was a radiator hose I modified to hook up the new filter and by pass tube. The "glue" is drying now. Have a GOOd ONE. Triker98304
|
|