|
|
Post by ibtrikin on Aug 9, 2011 16:26:14 GMT -5
I ordered the #6004. Shipping cost as much as the bearing. I wanted to get the other 2 to go in the CVT also, because I have one that is whining, but I'm unsure of their size. If anyone knows what size the other 2 bearings should be please post it here.
Thanks,
Warren
|
|
|
|
Post by edfr on Aug 9, 2011 16:51:36 GMT -5
Ibtrikin,
I cannot help you with those, But MAYBE WILDMAN remembers or has the OLD ones when he rebuilt his Tranny and they will usually have the numbers on them. So try PMing Wildman.
Lefty
|
|
|
|
Post by ibtrikin on Aug 12, 2011 20:26:12 GMT -5
David Sr. sent me the list of bearings so I thought I'd put them here in case anyone else was looking for CVT bearings for their 150cc Ice Bear trike. There are 6 bearings that David recommends changing, all OPEN radial ball bearings. They are:
6301
6002
6204
6004
6202
6203
Hope this will help others who may be looking.
|
|
|
|
Post by edfr on Aug 12, 2011 21:27:47 GMT -5
See I knew WILDMAN would know cause he had to replace his old tranny with all new parts.
And thanks for putting up the bearings sizes IBTRIKIN.
Lefty
|
|
|
|
Post by ibtrikin on Aug 13, 2011 8:26:00 GMT -5
Thanks, Lefty. I'm going to change all 6 in both scooters. The red one is jumping/shuddering almost every time I take off. It's frustrating to have to do all this within a month of buying them, but I know my dealer won't take care of the issue. When he told me the shuddering was "normal" I knew I was on my own. Thanks to you guys here, I know I'll get them running great!
Warren
|
|
|
|
Post by edfr on Aug 13, 2011 11:45:30 GMT -5
Yea, the dealers do not know much of anything about the Rear Axles on the Trikes. We are the ones that have to learn and figure out how and what is wrong and how to fix them.
Mine used to shudder and mine has Reverse. So I stopped using the Reverse now with the missing support bearing I can actually use Reverse if I want. It goes in smooth in forward and Reverse with no shuddering and jumping. But I still do not use it, the trike is very easy to move around.
Lefty
|
|
|
|
Post by ibtrikin on Aug 13, 2011 16:49:43 GMT -5
I agree Lefty, these trikes don't really need reverse. Mine didn't have reverse, but they roll easy. If someone had a bad leg reverse would be a blessing though.
|
|
|
|
Post by ibtrikin on Sept 1, 2011 14:51:10 GMT -5
I was going to put in the 6004 bearings in today, but there's already a sealed support bearing there. My trikes are 2010 models without reverse, so if you have a 2010 don't bother ordering bearings unless you just want to change them. Mine were in good shape so I'm saving the bearings I ordered for future use.
|
|
