Anniversary Ride

[CCProf]

This was the anniversary of my move from a 150cc to the Xpeed 250i. Sunday was a great day so I went for an anniversary ride. I had to split the video for photobucket.

"Part 1" is side streets, back roads, rough roads and crater dodging.
"Part 2" is a 60 mph run up the 4 lane including (OMG!) passing a cager with a scoot.

Sorry about the quality, shooting through plastic doesn't give the best pix. I ran out of memory before I got home.

Part 1
s722.photobucket.com/albums/ww224/ldmitchell_photos/?action=view¤t=Mar21ride_0004.flv

Part 2
s722.photobucket.com/albums/ww224/ldmitchell_photos/?action=view¤t=Mar21ridept2_0005.flv

[choirguy]

Thanks for sharing the video! Looked like a great day to be out. We had terrific weather in the Seattle area on Saturday. Was a great day for riding, and there were lots of bikes on the road. Stay safe out there.

[CCProf]

Thanks - the same back at you!

[toledo1156]

Loved the videos!. Thank you very much for the submission. However, I do have a question. I am planning on either adding an extension on my windshield, or replacing it with a larger one as I don't like all the wind noise.

I cannot determine from the videos if the extension is on the inside or outside of your windshield. Which is it? I would also like to know what type of hardware is used to fasten it to the windshield.

Jerry

[CCProf]

Jerry - The original owner put the extension on. It's a regular scoot windshield that he added to the outside. It's attached by the screws you can see. He evidently cut the bottom of the add-on then drilled it and attached with the screws. He didn't trim the sides so the extension is a little bigger on each side and it looks a little strange. He used some chromed plastic to trim it out. Works fine except it starts to vibrate around 60-65 mph.