|
|
Post by poorr4driver on Jun 4, 2009 21:19:39 GMT -5
Well I went into the garage last night to remove the dumb alarm box as per 90GTVert's how to thread...and this happened.  I even pull the switches I didn't use   I ended up going from this  ...to this  So far everything work the way I had hoped. I guess we'll see if I make it to work tomorrow. That's all for now. Thanks for lookin. |
|
|
|
Post by Riddick79 on Jun 7, 2009 1:23:12 GMT -5
Wow. That's a big weight reduction.  Is that a Schwinn bike computer? If so, do you have any pics of how you installed it to the wheel? I purchased one a while back but can't think of how to install the transmitter (or whatever it's called). |
|
|
|
Post by kliff on Jun 7, 2009 7:59:41 GMT -5
Wiring simplification is GOOD!
More pics....please
|
|
|
|
Post by poorr4driver on Jun 7, 2009 17:28:00 GMT -5
|
|
|
|
Post by relenger on Jun 8, 2009 15:14:34 GMT -5
where did you get the pink grips?
|
|
|
|
Post by poorr4driver on Jun 8, 2009 21:38:01 GMT -5
I found em at a local bike ship. They're way more comfy than the stocker
|
|
|
|
Post by Riddick79 on Jun 10, 2009 1:52:11 GMT -5
Thanks. I'll keep an eye on this thread.
|
|
|
|
Post by poorr4driver on Jun 10, 2009 21:30:20 GMT -5
Well I can't find my camera right now, but I'll try to get the pix up tonight. FOUND IT!  1st I zip tied the magnet to the wheel...opposite the valve stem trying to keep the wheel in balance.  2nd find an old wire coat hanger, cut a small chunk and bend it...  To something like this and zip tie everything. Sorry it's kind of a lame tut... |
|
|
|
Post by poorr4driver on Jun 17, 2009 19:05:14 GMT -5
Donor Scoot!!  Look for a swap thread soon! |
|
|
|
Post by Riddick79 on Jun 18, 2009 1:26:02 GMT -5
Cool. Gives me an Idea of how to mount mine.
Thanks for the pics.
|
|
