|
Post by kyfriedscooter on May 2, 2009 21:50:06 GMT -5
Ok, it started like this: Now it looks like this: Still have some work to do on the wheels & adding some LED's. Almost done, though.
|
|
|
Post by Troll on May 2, 2009 23:47:26 GMT -5
Looks good, paint the wheels black and smoke out the lens.
|
|
|
Post by allworld on May 3, 2009 8:01:01 GMT -5
I like it. Do you have any rear view mirrors? I saw some flat black, round one's with 10" stems and 8mm thread at a local shop, might fit nice on your scooter.
|
|
|
Post by kyfriedscooter on May 3, 2009 9:20:10 GMT -5
Thanks. I have a right side mirror, the left side bit the dust a while back. I should get two matching ones back on there.
|
|
|
Post by justin666 on May 3, 2009 10:06:59 GMT -5
this thing is sick. i'm actually going outside to paint the two silver pieces beneath the seat flat black on mine. did you just hit it with a light sandpaper and spray it?
|
|
|
Post by kyfriedscooter on May 3, 2009 10:23:05 GMT -5
Yes, I sanded quite thoroughly. There were a few factory paint blemishes and I had to sand down the area where the model sticker was. Other than that, it's sand and spray.
|
|
|
Post by justin666 on May 3, 2009 11:25:37 GMT -5
im going to practice on the front fender to see my results because i dont plan on putting it back on. did you paint the plastics on the side of the floor boards with the same paint or left them as is ?
|
|
|
Post by kyfriedscooter on May 3, 2009 13:04:42 GMT -5
I painted everything but the floor board, sides included.
|
|
|
Post by phaze on May 4, 2009 6:44:57 GMT -5
looks like 90 vert should of patented that look lol
|
|
|
Post by Scooterholic on May 8, 2009 16:43:17 GMT -5
looks cool
|
|
|
Post by justin666 on Jun 1, 2009 9:11:03 GMT -5
I notice your missing the back fender and I like that look. I'm wondering what you did to get rid of it because mine is all one assembly and goes underneath the scoot. Did you remove it all or cut it? Very curious let me know
|
|