|
|
Post by dukebravo on Mar 23, 2009 15:45:54 GMT -5
Hello - any of you folks know if the variator pulley from a 50cc 2 stroke will fit a 50cc 4 stroke? Thanks for the input!
|
|
|
|
Post by 90GTVert on Mar 23, 2009 17:17:15 GMT -5
I think some of the 50cc 4 strokes were actually designed to use minarelli 2 stroke CVT components. Not sure which ones, I just remember hearing that at some point. You can probably count the splines on your crankshaft and measure the diameter to compare it to 2 stroke specs. I'll go measure a crankshaft for you and count the splines. I think I already know what it is, but I'd rather be sure for you.
|
|
|
|
Post by 90GTVert on Mar 23, 2009 17:23:07 GMT -5
15 splines, 16mm diameter (actually measuring 15.9mm for me), 63mm length of splines
|
|
|
|
Post by dukebravo on Mar 26, 2009 23:17:57 GMT -5
Thank.you.so.much! I can't believe you took the time to go measure for me. It seems they are different and the rollers are a tad smaller as well. No worries. The right part is on the way! Cheers, Peter
|
|
