|
|
Post by 2strokd on Feb 26, 2009 22:40:09 GMT -5
I just ordered a set of Dr.pully sliders for my scoot. From what ive read these are allot better way of variating. I dont know anybody thats tried them out. Anybody done the roller to slider switch? Are they really that much better?  |
|
|
|
Post by 90GTVert on Feb 26, 2009 23:17:40 GMT -5
I've never messed with sliders so all I can tell you is what I've heard... both perform about the same but the sliders wear less.
|
|
|
|
Post by dude on Feb 27, 2009 3:25:49 GMT -5
I was happy with them. You could tell they shift better. Gained mph ? weather was diff (cold) and iam heavier. Ive added a Malossi Var. Not sure if its worth the money vs. stock w/ sliders.(work a little better) But iam going BB soon. May try sliders in the Malossi Var.
PS. i found some sliders at Parts Unlimited. Called Adige may be cheaper. They have diff compounds.
|
|
|
|
Post by motomech on Feb 27, 2009 18:58:16 GMT -5
|
|
|
|
Post by 2strokd on Feb 27, 2009 19:50:33 GMT -5
I checked it out, it is interesting, thanks motomech!
|
|
|
|
Post by crea2k3 on Mar 16, 2009 7:37:41 GMT -5
Has anyone tried a similar test of the two as on that website but on a qmb139 /gy6 ?, just thinking now on which to get after looking at that post....
|
|
|
|
Post by pedez2000 on Mar 17, 2009 0:49:07 GMT -5
we sell them and installed them in our local customer scooter, atvs, and carts. and use them too.
both rollers and sliders from dr pulley.everyone loves the slider.other then ordering to heavy or to light sliders.i've not had any compliants.
you will be happy.
|
|
|
|
Post by 2strokd on Mar 17, 2009 13:51:30 GMT -5
Oh yeah, the sliders. I put a set off Dr.pulley 4.5g sliders in, and they made a diff. A pair of those combined with a set of 2000rpm(red)clutch springs, and a 1000rpm(blue)torque spring made my scoot a totally different ride. Today, without any changes to the motor my scooter pulled me an average of 9mph faster up a pretty steep hill about 1mile long. I was only able to run about 30mph at the steepest part of the hill with the old set up, now with this set up it didnt drop below 39mph. I would recomend them to anyone.
|
|
|
|
Post by dude on Mar 17, 2009 23:59:57 GMT -5
Did you gain on top end on flat ground?
|
|
|
|
Post by 2strokd on Mar 18, 2009 8:09:26 GMT -5
I could hit about 47 on flat ground with the old setup, now i can cruise about 50 on flat ground with no wind. Im running premix now, but that shouldnt make the results much, if any different. All within the speed limit of course ;D
|
|
