|
|
Post by gy6rocket on Jan 12, 2009 19:49:48 GMT -5
I guess time will tell, as I will not be able to test it out for a couple more months. 12" of snow on the ground with 6-10 more inches expected in the next few days, along with temperatures below 0 degrees F ! It still ran really good before I removed the engine for the winter teardown. I'm considering making one of the headlights on my dual setup an air collector, plumbed to the intake  Like I said before though, the real reason for doing this was not really to increase performance, but to get the carb untangled from the stupid Chinese engine mount design to make room for my CNC machined/Hand fabricated aluminum design ;D shown here  |
|
|
|
Post by gy6rocket on Jan 12, 2009 19:53:07 GMT -5
Hey Shook, Sorry I have not responded to your PM; been really busy, I'm giving you a call right now.
|
|
|
|
Post by stradarx150te on Feb 9, 2009 11:08:10 GMT -5
I'M doing the same install with my carb but I'm running a tube down to the bottom of the scooter, Its going to be like an cold air intake. The filter sits on the carb and the tubing goes over the filter and then down. I'm not sure if its going to work still waiting on the carb but it should.
|
|
|
|
Post by gy6rocket on Feb 9, 2009 23:29:01 GMT -5
It will work.. Just watch out for the puddles A mouthful of water is sure to ruin a gy6! Just realized how close you are to me strada, may have to have a meet! |
|
|
|
Post by stradarx150te on Feb 9, 2009 23:41:31 GMT -5
|
|
|
|
Post by stradarx150te on Feb 11, 2009 19:22:22 GMT -5
This is the best way to mount a carb it works great!!!!
|
|
|
|
Post by jrinlv315 on Feb 11, 2009 22:15:22 GMT -5
how it been running for you? did you just relocate and do nothing else?
I'm having a little trouble getting my carb adjusted and running right, but I'm getting closer (I did this relocation also) JR
|
|
|
|
Post by stradarx150te on Feb 12, 2009 9:25:28 GMT -5
It runs great plus its so easy to change the jets or adjust the air fuel mixture screw. Plus when im riding it i can feel the air going right to it. The old way i couldn't get the filter to fit vary tight spot. plus i hatted taking the carb on and off to adjust the air-fuel screw. IT WORKS GREAT
|
|
|
|
Post by ltdhpp on Feb 12, 2012 10:26:15 GMT -5
Any way to get back the pics of this? Or see some like it?
|
|
|
|
Post by teklock on Feb 12, 2012 12:53:03 GMT -5
I would like to see some pics of this also.
|
|
