|
|
Post by edgewater on Sept 7, 2008 16:51:34 GMT -5
I purchased a SunL QM50QT-3E from a dealer that skipped town a couple of years ago. I did not get a manual or any reference material. I see some available online manuals out there but they don't seem to be my scoot. At the time of purchase, the guy said to mix oil in with the gas during the break-in period and than just put plain gas in. Okay fine, but now where do I put the oil? I have written the SunL people. They did respond back and tell me where there is a dip stick to check the oil and a place to drain it. I sent some pictures of my scoot up close to them that shows that where they were saying it was... it wasn't. Than I never heard back from them. Is anyone familiar with this brand/model? Any help would be greatly appreciated. Here is a pic of the scoot. www.edgewatermd.com/scooter/ |
|
|
|
Post by 90GTVert on Sept 7, 2008 21:02:28 GMT -5
I know nothing about that scoot, but if it has an oil resevior it shouldn't be too hard to find. Check behind any access panel you see on the scoot. Crawl under it or take the seat bucket out and look. It really shoudl be easy to find though. Are you sure it's a 2 stroke?
|
|
|
|
Post by Karl on Sept 9, 2008 17:45:01 GMT -5
On that model, the oil reservoir should be under the seat. It's going to have a small rubber top near the metal fuel cap, IIRC.
That was my very first scoot but it was red and was a QingQi. I bought two of them for $500 each including shipping for my wife and me.
It was a great scoot. I put close to 1500 miles on it before I sold it. No issues.
Chain drive and slow acceleration from stopped, but the engine was solid for an inexpensive scooter. I liked mine.
Karl
|
|
|
|
Post by edgewater on Sept 13, 2008 22:01:05 GMT -5
I found the oil input and it has oil so, all is good now.
Thanks.
|
|
