|
|
Post by kevinx on Aug 18, 2008 19:05:05 GMT -5
I have numbers on the carb and would like to know what size it is and what jets i need to get the number is : YY50QT TA 8D11 4 came off a 1E40QMB motor
|
|
|
|
Post by kevinx on Aug 18, 2008 19:40:10 GMT -5
|
|
|
|
Post by Karl on Aug 18, 2008 19:44:58 GMT -5
kevin, I have that motor and the main jet is a #70 but I think my carb is an 18mm. I don't know how they measured it and I haven't measured it myself.
Karl
|
|
|
|
Post by motomech on Aug 18, 2008 20:00:43 GMT -5
That would appear to be a copy of a small Mikuni round slide and would use short Mikuni-style hex head jets.
A well stocked motorcycle dealership parts dept. might have a selection in stock. The sizes you need will be smaller than usual though.
There are on-line venders for those jets.
|
|
|
|
Post by kevinx on Aug 18, 2008 20:06:24 GMT -5
did you check out the link to the pic's of the carb? Partsforscooters said they don't have any jets for it
|
|
|
|
Post by Karl on Aug 18, 2008 20:12:36 GMT -5
|
|
