|
Post by kevinx on Aug 17, 2008 18:06:33 GMT -5
i can't seem to find where i can buy jets for my carb. I have a 1E40QMB. are they all the same no matter if it is a 2 stoke or a 4 stroke
|
|
|
Post by kaintuckdave on Aug 17, 2008 19:24:18 GMT -5
Have you tried a local motorcycle shop that has a repair department?
|
|
|
Post by kevinx on Aug 17, 2008 19:32:00 GMT -5
does that meam the jets are all the same for any carb on a 2 cycle engine
|
|
|
Post by Karl on Aug 17, 2008 21:41:25 GMT -5
No, you'll have to take the jet out and go down to a motorcycle dealer and show them so they can compare.
Also, a tip. Go to an independent shop that works on bikes but is not a dealer, too. Those guys usually have tons of jets because they do engine rebuilds.
Karl
|
|
|
Post by rallyrrr on Aug 18, 2008 21:08:08 GMT -5
OMG, Karl, over $12.00 (including shipping) for a tiny piece of brass. Not me buddy. I'll just keep drilling filling and redrilling.
|
|
|
Post by rallyrrr on Aug 18, 2008 21:12:41 GMT -5
Poof. You took down your link. Slick.
|
|
|
Post by Karl on Aug 18, 2008 23:36:29 GMT -5
Rally, I didn't remove it. Must've been another mod?
But yes, you're right, they're not cheap!
|
|
|
Post by motomech on Aug 19, 2008 21:43:18 GMT -5
Jets don't have to be bought at the dealership. On-line snowmobile supply stores are a good place to find Mikuni jets. Short hexs go for about $2.50 each.
|
|
|
Post by kevinx on Aug 27, 2008 21:37:43 GMT -5
I can't find any jets for the carb so i bought a 19mm carb that akes mikuni jets
|
|