|
|
Post by lukepop789 on Feb 19, 2013 7:48:28 GMT -5
I just bought this Chinese scooter, its a Verucci challenger. 49cc, it has no spark, anybody know that the specs are for ohms in primary and secondary coil? how many psi of compression these have? any help is greatly appreciated i cant find a manual anywhere. Ive asked this question on a different forum, and I mine as well have asked my dog. they were no help.
|
|
|
|
Post by teddy554 on Feb 19, 2013 11:12:21 GMT -5
|
|
|
|
Post by teddy554 on Feb 19, 2013 11:14:24 GMT -5
|
|
|
|
Post by tortoise on Feb 19, 2013 11:45:40 GMT -5
|
|
|
|
Post by lukepop789 on Feb 19, 2013 12:01:15 GMT -5
ok maybe i left out a little info, is a 2006 verucci vc50ts-3m. no stator, no cdi. is has primary and secondary coil system. 108ohm on primary coil, 1ohm on lighter coil. and a little over 8ohm on secondary lighter coil. is my primary coil bad? thanks for the replies.
|
|
|
|
Post by lukepop789 on Feb 19, 2013 12:02:08 GMT -5
8ohm on secondary igniter coil, not lighter coil sorry
|
|
|
|
Post by tortoise on Feb 19, 2013 12:22:06 GMT -5
any help is greatly appreciated Utilize Google search at bottom of page and enter . . D1E41QMB. |
|
|
|
Post by lukepop789 on Feb 19, 2013 13:02:32 GMT -5
havent found much info at all about coils... oh and by the way my lead that goes into the second coil, has about 2 volts, whether the key is on or off
|
|
|
|
Post by lukepop789 on Feb 20, 2013 20:34:24 GMT -5
ok so I changed out the secondary coil with one i had sitting around, off a chaparral 440 snowmobile...idk how much you guys know about bigger engines, but that's all Ive ever worked on. but I'm getting some voltage through the coil now, enough to poke me if i stick my finger in there(my fav way to test for spark lol) but not enough to throw a spark when i hook up the spark tester. Is this coil just not compatible? not dropping enough charge for this small engine or something? thanks
|
|
