|
|
Post by GaScoot on Feb 16, 2013 11:11:46 GMT -5
i am putting a new engine in my buddys scoot after crank failure claimed the last one. the problem is that the old engine had a 5 wire plug for the stator and the NEW engine only has a 2 wire plug with two more seperate wires. Can i still make this work?  the old engine is already gone so there goes any swapping... Any help is as always greatly appreciated!!!! Attachments:
|
|
|
|
Post by GaScoot on Feb 16, 2013 11:12:37 GMT -5
plug for stator for the NEW engine Attachments:
|
|
|
|
Post by GaScoot on Feb 17, 2013 7:15:58 GMT -5
Nobody, really???
|
|
|
|
Post by teddy554 on Feb 17, 2013 7:25:03 GMT -5
Just swap out the stators problem solved
|
|
|
|
Post by rae4180 on Feb 17, 2013 7:42:36 GMT -5
maybe you well get lucky and one is just a ground wire if so ground it off on the frame of the scoot.
|
|
|
|
Post by tvnacman on Feb 17, 2013 8:49:42 GMT -5
maybe you well get lucky and one is just a ground wire if so ground it off on the frame of the scoot. well I would say the engine . your info is slim , with more info would help answering your question . John |
|
|
|
Post by GaScoot on Feb 17, 2013 8:49:48 GMT -5
Would that work? The only other thread I have found related to this same issue was on another forum and the guy had the same issue but never stated what his fix or solution came to be. And I have found diagrams but they all grounded through the stator, I'll be installing the engine tomorrow I'll post more with what happens...
|
|
|
|
Post by GaScoot on Feb 17, 2013 8:56:08 GMT -5
Can't swap stator, don't have the old one. And the engine is a 139qmb. The extra wire on the scoot will be a green wire and the new engine doesn't have a green wire from the stator just the four in the second pic.
|
|
|
|
Post by tvnacman on Feb 17, 2013 9:37:35 GMT -5
just make sure you have a good engine ground , even if you have to connect your own from the battery and you should be fine . Is the stator and harness plug the same ?
John
|
|
|
|
Post by GaScoot on Feb 18, 2013 6:10:10 GMT -5
No the plugs are very different but with similar wires minus the green one on the new engine.
|
|
the old engine is already gone so there goes any swapping... Any help is as always greatly appreciated!!!!
