belts keep breaking

[rockhead]

my belts keep breaking I took it apart started it and the belt is hitting the starter bendix when wot


the bike is a e-ton sport 50

[danno711]

You mean "ETON America?" .....a Chinese manufacturer.....with an American name!

Brilliant!

That being said, I hope someone here can help you.

[edfr]

Not much you can do but not allow the belt to climb that high. You can do that by getting your rpms to drop some at wot. You most likely may loose a few mph on the top end but you can make that up and much more by gearing up your tranny.
Lefty

[rockhead]

I have a NCY varator and clutch could i put a spacer or something in varator to keep it from going that hi, I tryed different size belts it shreds all of them

[rae4180]

they do make spacers for that. but it would be better to go up a few sizes with your rollers.....

[teddy554]

What size belt did you put back in it

[skuttadawg]

Did it eat a belt with the stock variator ? Maybe the NCY is too large for your clearances

[rockhead]

the belt size is 723 18 30.
im using 9 gram rollers.
variator same size just different shape ramp

[teddy554]

i would try the next size down belt or a different supplier for the belts, with a smaller belt it wont ride as high up but buy three different belt the same size from different places and i bet none are the same length

[rockhead]

i think it i have to get longer drive boss

[teddy554]

for it doesnt ride has high or you can had shim scootertuning.ca/en/variators/31037-variocontrol-special-top-performances-10-03-05-08mm-for-15mm-taper.html

[rae4180]

try your old ladys nylons for a belt...........lol.............

[rockhead]

thanks teddy