|
Post by rae4180 on Feb 9, 2013 19:40:11 GMT -5
the carb on my kymco 50 cc has a acc pumb on it and the shaft got bend how would that happen. the carb is less then a year old.
|
|
|
Post by edfr on Feb 11, 2013 0:58:18 GMT -5
They are adjustable, did you try to adjust? Lefty
|
|
|
Post by rae4180 on Feb 11, 2013 10:51:25 GMT -5
dont see how they are adjustable. they just go up and down.
|
|
|
Post by edfr on Feb 11, 2013 15:17:09 GMT -5
On some the Throttle bracket that pushs the Shaft down has a Screw to adjust if so it could have vibrated and closed the gap. The only other thing I can think of is the throttle bracket part that makes contact with the Shaft IF not screw adjustment was bent down somehow or the Throttle Cable is pulling the Butterfly Control wheel to far. Lefty
|
|
|
Post by rae4180 on Feb 11, 2013 21:15:55 GMT -5
ok thanks I had a old carb that had the same shaft so I replaced with that one seems to be working ok now.....
|
|