|
Post by bandolero on Oct 24, 2006 21:57:18 GMT -5
I LIKE 2 STROKE.MORE FAST,MORE NOISE AND FUN!IN 1972 MY FIRST BIKE,ELSINORE 125cc.FROM HONDA.MY FIRST SCOOTER,JOG YAMAHA 50cc,1992.I DRIVE MORE 2 STROKE FROM HONDA TO SUNDIRO 1999.I CAN HELP YOU ABOUT 2 STROKE. MY JOG RUN 8.96 IN 1/8 MILLE 63MPH.
|
|
|
Post by Aaron on Oct 24, 2006 22:25:03 GMT -5
Banolero glad you got your own board! It was time for a 2-stroke discussion!! I shall add a little some thing to your User ID!!
Aaron
|
|
|
Post by swakk on Oct 25, 2006 10:59:39 GMT -5
for one week i drive a kymco 2stroke 125 what a bike ! nervous, fast and noisy (somebody make a hole in the exhaust. But i had to give it back to have my xxxxxxx echarm i like two stroke !
|
|
|
Post by ncsk8er on Oct 30, 2006 12:38:03 GMT -5
Sup bandelro...Im pretty new to the forums,but not to scooting.Check out my thread in the General section under Supercharged scoot.That is my scoot and project that im currently working on.Im also installing a boost bottle today.Let me know if you or anyone you know have done or tried this mod.And if so,what were the results.Thanks,Ray
|
|
|
Post by bandolero on Oct 31, 2006 22:08:44 GMT -5
MY FRIEND,I SEE YOUR POST.BUT THE TURBO OR SUPERCHARGE IS BAD OPTION.HERE IN PUERTO RICO,WE CAN FIND MORE POWER AND SPEED WITH GOOD PRODUCTS.THE 2 STROKE ENGINES NEED BETTER PARTS.WE BEGUN WITH THE CRANKSHAFT,FULL CIRCLE.ALUMINUM CYLINDER,BIG DOME FOR AIR FLOW.BIG CARB.BIG EXHAUST.AND YOU HAVE A KILLIN MACHINE. ALSO WE DO NOT MADE VENTO SCOOTERS FOR RACE.THIS TYPE OF ENGINES,NO HAVE GOOD TRANSMISSION.TO FIND RACE GEARS FOR THIS MOTORS IS TO HARD. IN MY 15 YEARS OF WORKING WITH 2 CYCLES.ONLY WE TRUSS IN YAMAHA,MALAGUTI,DERBI.FOR SPEED.THIS SCOOTERS HAVE A LOT OF REPLACEMENT PARTS FOR RACE.CORSE THE SETTINGS IS THE LAST KEY FOR SPEED. YOUR FRIEND "BANDOLERO"
|
|
|
Post by riker140 on Nov 5, 2006 15:41:37 GMT -5
Need help from 2 stroke guru's I am a 4 stroker but I am adding a slide type PE20MM carb slide type carb I "no nothing" " Klink" about slide carbs-- need links to how to set one up for a 72cc engine.
Your turn
Dave Riker humbled
|
|
|
Post by bandolero on Nov 6, 2006 21:59:29 GMT -5
NORMALY WEN WE BUILT A 70cc 2 stroke ENGINE WE USE A 28mm CARB AND BIG PIPE AND EXHAUST.BIG INTAKE MANIFOLD.BECAUSE IF YOU USE A SMALL CARB YOU WILL BROKE THE PISTON. OR YOU TRY PUT A 20mmCARB TO 72cc 4 STROKE ENGINE?
|
|
|
Post by Dennis D on Nov 6, 2006 22:12:41 GMT -5
Yup, he's putting a 20mm slide type carb on a 72cc 4 stroker, but needs info, pics, etc on throttle connection, and how to do adjustments on that type of carb.
|
|
|
Post by riker140 on Nov 19, 2006 14:03:11 GMT -5
Hay Bandelraro:
I got the PE20MM slide carb working. but not sure what jets I should go to I have a 58 Low and a 100 Hi in it now I can tell it wants more gas on upper end --Needle is set in middle slot --got any input??
8.+ seconds 63 plus in 1/8 Mile--Wow I just want to do less that 10 sec 0 to forty MPH. My top is 62.4MPH long straight stretch.
|
|