|
|
Post by ilovenxstage on Mar 1, 2013 8:10:00 GMT -5
I'm about to replace the carb on my TaoTao T3 and I was wondering how to properly drain the fuel from the old carb before I remove it.
|
|
|
|
Post by Pony66 on Mar 1, 2013 9:34:04 GMT -5
Many scooters have a rubber hose with a metal coil sheath coming from the float bowl. At the end of that fuel line is a valve with a screw. Turn the screw to open the valve and drain the fuel.
Some scooters just have a screw on the bottom of the float bowl. Turn the screw and the fuel will drain.
|
|
|
|
Post by millsc on Mar 1, 2013 9:39:24 GMT -5
i just take it off turn it upside down take out the screws, then dump the gas back in the tank.
|
|
|
|
Post by ilovenxstage on Mar 2, 2013 9:03:33 GMT -5
Many scooters have a rubber hose with a metal coil sheath coming from the float bowl. At the end of that fuel line is a valve with a screw. Turn the screw to open the valve and drain the fuel. Some scooters just have a screw on the bottom of the float bowl. Turn the screw and the fuel will drain. Thanks. My scooter has the tube coming from the float bowl. |
|
