|
Post by boamedt on Feb 23, 2013 16:18:29 GMT -5
anyone know what these do? im going to rewire the bike to get all the unnecessary things outta there. it just loops two wires and i tried firing up the bike after unplugging it and it did so just fine.......any reason there are these wires to no where?
|
|
|
Post by edfr on Feb 23, 2013 16:32:57 GMT -5
Could be to hook an alarm and or remote, reason I say that notice the jumper wire. Lefty
|
|
|
Post by teddy554 on Feb 23, 2013 18:17:19 GMT -5
i second what lefty said
|
|
|
Post by tvnacman on Feb 23, 2013 18:19:29 GMT -5
|
|
|
Post by boamedt on Feb 23, 2013 19:44:10 GMT -5
Everything works fine
|
|
|
Post by tvnacman on Feb 23, 2013 19:47:30 GMT -5
its a chinese mistake
|
|
|
Post by gy6girl on Feb 23, 2013 21:57:35 GMT -5
Yes, I found a few weird electrical mistakes those Chinese have made.
|
|
|
Post by inkyben on Feb 23, 2013 23:46:23 GMT -5
its a kill switch, if you disconnect it then your bike wont shut off.
|
|
|
Post by motts on Feb 24, 2013 0:31:55 GMT -5
I second what inkyben said. Kill Switch.
|
|
|
Post by tvnacman on Feb 24, 2013 10:11:14 GMT -5
he claims all works ok with it unplugged .
John
|
|
|
Post by boamedt on Feb 24, 2013 11:21:16 GMT -5
It deff works unplugged
|
|
|
Post by boamedt on Feb 24, 2013 17:59:47 GMT -5
Inkyben is right...most of those wires I guess nothing, I just tried cutting it off it the bike won't shut offwith the ignition switch. Only the kill switch...so I looped the two wires and we're all good again
|
|