|
Post by bobkat on Jan 22, 2013 16:20:01 GMT -5
just rec'd a performance exhaust. when it was ordered all engine numbers matched [50cc [actually 49cc] 2t minarelli engine. the exhaust pipe to engine doesn't come close to matching up. not sure why when everything matched and dealer said it would fit. any suggestions? adapter kits? ?? need some help! anybody else have this problem?
|
|
|
Post by inuyasha on Jan 22, 2013 16:28:17 GMT -5
Hi What exactly doesnt match up? the diameter of the pipe or the mounts them selves Lots of time you have to mod or fabricate to get them to fit Take care and ride safely Yours Hank
|
|
|
Post by bobkat on Jan 22, 2013 16:36:24 GMT -5
the mounts....and how would u mod or fabricate to fit...any help would help!
|
|
|
Post by fugaziiv on Jan 22, 2013 16:38:27 GMT -5
bobkat - The Minarelli comes in two variations, Horizontal and Vertical. This could be an issue, as well as the fact that I've found that many dealers mix up the Minarelli and Morini engines, which also causes an issue.
The bottom line is that the easiest fix is to find the right pipe for your engine, since as Hank just pointed out it is time and money intensive to fab an incorrect application into a correct one. Sorry.
Matt
|
|
|
Post by inuyasha on Jan 22, 2013 16:39:02 GMT -5
the mounts....and how would u mod or fabricate to fit...any help would help! Hi Without seeing it first hand i cant answer it that easily Any photos? Take care and ride safely Yours Hank
|
|
|
Post by carasdad on Jan 22, 2013 16:39:29 GMT -5
Post a pic of how it doesn't fit...that be really helpful to everyone here..
|
|
|
Post by bobkat on Jan 23, 2013 9:02:51 GMT -5
well...here are some pics...not the greatest camera. hopefully, u can see the mount is impossible, seems too long [do they mount underneath on these minarellis] mine mounts in the rear etc etc Attachments:
|
|
|
Post by bobkat on Jan 23, 2013 9:12:38 GMT -5
how do u post more than i pic per post? anyway here is another one. Attachments:
|
|
|
Post by teddy554 on Jan 23, 2013 10:15:39 GMT -5
yeah look vertical plus its a bottom mounted motor whats the name of the scooter and your stock exhaust look like it mounts on the backside of motor in front of rear tire
|
|
|
Post by bobkat on Jan 23, 2013 11:10:05 GMT -5
Teddy, Here's the info: Jieda,50cc[49cc],Hunter50QT-4, 2T w/ Minarelli engine JD1PE40QMB, *85070096* attached pic shows most of new exhaust and the stock exhaust next to each other. Hope somebody can help out there? Please! may somebody the correct fitting exhaust system? Attachments:
|
|
|
Post by skuttadawg on Jan 23, 2013 11:40:44 GMT -5
Is yours a 49cc or 70cc BBK ? I bought a MMG pipe that said it was for 50 or 70cc well it would not line up when I had the stock 49cc engine but fit perfect with my BBK
|
|
|
Post by bobkat on Jan 23, 2013 11:48:53 GMT -5
ITS THE STOCK 49CC ENGINE
|
|
|
Post by skuttadawg on Jan 23, 2013 11:56:53 GMT -5
So you may have have a pipe for a 70cc 2T perhaps .
|
|
|
Post by wangchicken on Jan 23, 2013 13:03:36 GMT -5
why the performance pipe on stock engine? if you are asking how to make an exhaust fit you might want to return it, and buy the proper pipe or run a stock pipe.are you prepared for rejetting?
|
|
|
Post by skuttadawg on Jan 23, 2013 13:19:01 GMT -5
Love the safety cone . With an unrestricted pipe a BBK and upjetting will make you be happy happy happy
|
|
|
Post by teddy554 on Jan 23, 2013 13:51:51 GMT -5
Yeah wrong pipe your engine is something different never seen one like that. The pipe will never work for your motor
Sent from my SPH-D710BST using proboards
|
|
|
Post by bobkat on Jan 23, 2013 18:32:46 GMT -5
i am doing some research, it does appear to be a vertical minarelli[49cc, 2t] engine, now the tuff question....where do i find a performance exhaust that fits this engine w/o any or too much modification? thanks for any help.
|
|
|
Post by teddy554 on Jan 23, 2013 20:16:50 GMT -5
|
|
|
Post by teddy554 on Jan 23, 2013 22:14:03 GMT -5
|
|
|
Post by distscootertuning on Jan 30, 2013 12:57:04 GMT -5
Your crankcase in not minarelli vertical , i dont know what is this kind of engine but most of parts are made for minarelli horizontal standart (zuma) .. minarelli horizontal (CPI) .. minarelli vertical and piaggio.
|
|
|
Post by bambamofatlanta on Feb 14, 2013 20:04:58 GMT -5
It looks like it would fit better on my scooter
|
|