|
Post by Fox on Dec 6, 2012 18:23:35 GMT -5
I posted this for sale a few weeks ago but the pics weren't very good and I got no responses so I pulled the engine and cleaned the dust off it today and took some better pics. It came out of a Ruckus clone. It uses a 729 belt which I'll throw in with the engine. I don't have the belt cover for it but they sell them fairly cheap at: www.partsforscooters.com/151-223_Left_Crankcase_Cover?sc=9&category=83011It's brand new. Zero miles. It sat outside for a while so the case has some discoloration. I'm asking $225 shipped. Feel free to ask questions if you have any. The center stand looks bent in this pic but it's just the way it's sitting with no wheel and the shadows. It's straight. The head is a non-egr/pair. It has a dimple machined where the port would be. The swing arm is set up for this big ol' splash guard. I'll throw it in for an extra $20 cause it has to go in a separate box or, you can just cut/grind off the splash guard mounts and repaint the swing arm.
|
|
|
Post by carasdad on Dec 13, 2012 14:05:51 GMT -5
Fox...man that is so tempting! I assume it would bolt into a regular short case frame?.. Not sure to be honest...as all the many many scoots that have been in the shop..I have not worked on a longcase QMB139. I have a set of new 12 inch 130/70/12 rims and tires that should fit that and would make a nice project bike...
|
|
|
Post by ryan52 on Dec 13, 2012 21:31:07 GMT -5
better be quick i might buy it???!!!
|
|
|
Post by carasdad on Dec 13, 2012 22:02:18 GMT -5
better be quick i might buy it???!!! Too late...already got it in my closet. Don't buy it...ya already got 5,000 scoot projects you are working on.. Gonna stat calling you Mr Vanderzee..cause just like him..you are trying to run the rest of us locals outta bidnes......
|
|
|
Post by ryan52 on Dec 13, 2012 22:38:15 GMT -5
im just kidding if your interested ill give my wallet a chance to breath..but do you really want it i know whod buy it quickkk
|
|
|
Post by millsc on Dec 13, 2012 23:15:48 GMT -5
so 225 is shipped price?
|
|
|
Post by urbanmadness on Dec 14, 2012 10:13:59 GMT -5
if it would fit in the 50 I have in the garage, I'd do it. DANG.... I am surprised nobody makes conversion brackets.
|
|
|
Post by millsc on Dec 14, 2012 11:15:57 GMT -5
id like to make a dirt bike out of it
|
|
|
Post by carasdad on Dec 14, 2012 11:47:05 GMT -5
im just kidding if your interested ill give my wallet a chance to breath..but do you really want it i know whod buy it quickkk Ryan..if I buy it...I am gonna make a 100cc scoot with it..using the 130/70/12 rims n tires I got. The bigger tires will ride smoother and give better top end. So come on dude...don't buy it..hell you got like 5 projects going on now...and the fastest scoot in our town and whole county!!!
|
|
|
Post by ryan52 on Dec 14, 2012 13:17:42 GMT -5
im not gonna buy it but yeah go for it. id like to see you get it up and going be cool to see you with a new project!!
|
|
|
Post by carasdad on Dec 14, 2012 13:24:43 GMT -5
im not gonna buy it but yeah go for it. id like to see you get it up and going be cool to see you with a new project!! Ryan....umm..ya look mighty handsome and manly today....and umm...well ya do know Christmas is coming...so you know...if you find it in your heart...well...you know the rest of the story..
|
|
|
Post by Fox on Dec 16, 2012 19:43:39 GMT -5
It'll bolt right in, but you may run into an issue with the shock absorbers 'cause they mount about an inch farther back than a short case. It's set up for a dual shock so the rear output shaft is longer so the right side swing arm will slide on after the wheel and then you put the nut on but you probably could still use it with a single shock or you could swap in an output shaft from a short case and voila! Single shock setup and no need for the right side swing arm. The bent 12 inch rim that was on this engine slid right onto a 139QMB short case confirming that the splines are the same so you could run a 10 in. wheel on the long case. I have no clue where to order another 12 in. wheel for it but I never looked...
|
|
|
Post by carasdad on Dec 16, 2012 19:53:42 GMT -5
Ok..so it is a longcase? I have 2 new rims and tires...but they are 130/70/12. Dual shocks would be kewl...the CY-T3 is the only scoot I have ever seen them on. What size tires were on you 12 inch rims?
|
|
|
Post by Fox on Dec 16, 2012 20:33:51 GMT -5
It had 90-90-12's. The 12 inch rim with the 90-90 tire actually fit on a short case so I know the long case could handle a bigger tire than that. Here's a picture of the exact same type engine with the exact same rim with the 90-90-12 tire: Same everything. I have the shocks still.
|
|
|
Post by carasdad on Dec 16, 2012 20:38:49 GMT -5
Thanks for the pic...very kewl. Where the right shock mount to at the top? Make a bracket on the frame?
|
|
|
Post by Fox on Dec 16, 2012 20:43:34 GMT -5
|
|
|
Post by carasdad on Dec 16, 2012 20:56:57 GMT -5
Ok..think my daughter could figure it out...she is a welder...how much more for the shock and fender in the picture?
|
|
|
Post by larrball on Dec 17, 2012 5:43:10 GMT -5
I have alot to say but can only say : "I dislike my bank account"
Yup, im have'n a bad day now :,
|
|