|
Post by xxbenjamminxx on Oct 26, 2012 13:47:33 GMT -5
I am trying to place an order with enviromoto but am wanting to pay with paypal, but it wont let me enter the coupon code unless I am paying with Google Wallet.
I was gonna just order the variator face but now decided to order the whole trans kit by ncy. I PMed asking about it but havent heard back yet and will be leaving in a little and would like to order it before I leave.
|
|
|
Post by Scooter Elements on Oct 26, 2012 14:49:49 GMT -5
Paypal does not allow or have the ability to enter coupon codes. It sucks. Its one of the reasons why i cant offer any. For the code to apply you must check out with enviromoto using google wallet. Or try emailing him and see if he can send you a discounted invoice via paypal. He is rarely on here but always on facebook. www.facebook.com/Enviromoto?fref=ts
|
|
|
Post by Enviromoto on Oct 26, 2012 15:09:30 GMT -5
Thanks for the PM. Replied. And Thank YOU scooter elements for letting me know I had a question on here. Very busy these days
|
|
|
Post by millsc on Oct 26, 2012 22:49:15 GMT -5
i havent ordered from enviromoto yet but plan to alot of good stuff there and good priced too always checking the site
|
|
|
Post by xxbenjamminxx on Oct 26, 2012 22:59:28 GMT -5
Well the payment for the trans kit is sent in and now the waiting begins......
Not sure if I should install the Koso and tune it when it comes to see what gains I get there, and then do the whole kit? Or the kit and just try the NCY clutch with the Koso to see the difference in what each variator makes....
|
|
|
Post by millsc on Oct 26, 2012 23:16:40 GMT -5
id use the whole ncy kit its probably better than the koso i bought the koso because it cost me 30 bucks plan to get the ncy if it works out for you
|
|
|
Post by xxbenjamminxx on Oct 26, 2012 23:41:32 GMT -5
Well I have both on the way and plan to most likely sell the Koso off since I changed my mind and went with the NCY. Will have to at least try it out though, unless I can return it getting it from Ebay
|
|
|
Post by Enviromoto on Oct 27, 2012 9:51:07 GMT -5
Thanks guys!
|
|
|
Post by dragzilla on Oct 31, 2012 21:09:56 GMT -5
You cant beat the koso for the money. I put one on mine and no problems....I like it. I put sliders instead of the rollers though.
|
|
|
Post by Scooter Elements on Nov 1, 2012 9:07:06 GMT -5
You cant beat the koso for the money. I put one on mine and no problems....I like it. I put sliders instead of the rollers though. I got a KOSO Variator in mine
|
|
|
Post by xxbenjamminxx on Nov 1, 2012 11:48:09 GMT -5
What weight sliders are you guys running? Going to be installing mine here in a few minutes......
|
|
|
Post by Scooter Elements on Nov 1, 2012 14:44:39 GMT -5
What weight sliders are you guys running? Going to be installing mine here in a few minutes...... I actually run with only 4 weights in my variator about 9 or 10g. but yea really its experimenting which is best for you. they sell roller kits on ebay so you can see which works best for you
|
|
|
Post by xxbenjamminxx on Nov 1, 2012 23:15:20 GMT -5
I was doing that as well before I got the sliders as my stock ones were 9g. I put the NCY variator and face on today and rode it to work with mg sliders. Rpms were at 6500the and it def pulled alot harder then stock and has more top speed too. Will gps it on my way home to get some numbers. Gonna put lighter ines in tomorrow and see then also hope to get clutch done in the am too.
|
|