molassi spring question

[spewya]

are all of the molassi clutch springs the same?? like the same size and shape??
i cant find yellow grab spings for my vento trition r4 under that category on provoscooter.com ..are the molassi springs advertised under the yamaha zuma 50 the same ones as the springs advertised under the 05 vent trition r4

if you didn't understand that im asking does molassi make more than one torque spring and grab spring or are they all the same shape and size just different weights

[gregw]

yes, malossi makes more than one size clutch spring and torque spring and they do all look fairly similar. Try other vendors like;
www.spi-parts.com/scooter-parts/yamaha/zuma-50-verticle-motor-1989-through-2001.html

www.racingplanetusa.com/yamaha-c-4658-1.html?utm_source=domain&utm_medium=domain&utm_campaign=scootercraft.comzuma-bws-50-vertical.html

There can be clues... At Spi Parts, look up a clutch bell for a zuma, and a trition and see if the clutch bell is the same part number for both machines. If so, it's a pretty good bet that the clutch springs would be interchangable.

[dude]

Stock Zuma bell 105mm, Vento 112mm. Sping are interchangeable. A lot of times just adding a Torsion Contoler will stiffen the spring up if everything is still stock.