|
Post by hobnob62 on Jul 22, 2012 15:45:59 GMT -5
Does anyone know where to find the fill bolt on a 2010 Hurricane? I've looked everywhere and cant find it. being new to scooters, I always took it to the dealer for service. Long story short, the last time i went in i was told i didn't need to change the gear oil. But now I'm starting to think that was B.S. I can see the drain bolt . Just cant find the filler. I have a feeling it is between the wheel and tranny but I'm hoping someone here can help me out. and if its not too much trouble a pic would be nice. so i know what I'm looking for/at. thanks in advance.
|
|
|
Post by felliott on Jul 22, 2012 18:07:21 GMT -5
Mine is on top of the gear case. It is a black cap that unscrews.
|
|
|
Post by hobnob62 on Jul 22, 2012 22:03:27 GMT -5
cool thanks a million.. when the sun comes up ill check it out.
|
|
|
Post by dude on Jul 22, 2012 23:47:49 GMT -5
Most of the time they take 110cc of oil =1/2 cup. Ckeck to be sure
|
|
|
Post by hobnob62 on Jul 23, 2012 7:02:53 GMT -5
OK I just checked. There is no screw cap on top of the case. any other ideas? and thanks for all you're help guys . I really appreciate it.
|
|
|
Post by felliott on Jul 23, 2012 15:05:53 GMT -5
The black cap is behind the air filter. Remove the 2 bolts holding air filter and you will see it.
|
|
|
Post by mcirish on Jul 23, 2012 19:31:04 GMT -5
I CAN TELL YA THAT I WOULD ONLY PUT THE CORRECT AMOUNT OF GEAR OIL IN BECAUSE/ I HAVE A KEEWAY 2 STROLE GOCCIA AND PUT TOO MUCH AS IN OVER 5 OZS AND IT STARTED SLINGING IT OUT OF A WEEP HOLE IN THA BOTTOM OF CASE AND WHAT A MESS . IT ONLY TAKES 4 OZS PER KEEWAY EVERY 600 MILES HOPE THIS HELPS
|
|
|
Post by hobnob62 on Aug 1, 2012 0:28:59 GMT -5
I took off the filter box and found nothing. Im just going to take it to another scoot shop and have it done. Thanks for everyone's help. You guys are great.
|
|
|
Post by skuttadawg on Aug 1, 2012 0:41:55 GMT -5
|
|
|
Post by wile on Aug 1, 2012 1:15:33 GMT -5
You have to take the CVT cover off to get to it. But find the Vent Hose and get a little 6oz or 10oz oil pump can. Drain your oil see how much came out and fill your oil can with the same amount the oil. The stick the pointed end into the Vent Hose and fill it that way. Wile
|
|