tap
Junior Dawg
Posts: 13
|
Post by tap on Jul 16, 2012 8:28:39 GMT -5
My original Electronic signal flasher died. I think from riding the bike without the battery. I traced the wires, and found that a Standard 2 Terminal Flasher would work. All I did was pull the wires from the 3 wire Plug, Clipped the black wire (Ground) and capped it off. Red/White wire (+12) X side of Flasher, and Orange wire (Load) to L side of flasher. Works great and was a whopping $3.19
Todd
|
|