MC54b Won't Idle |

searook New Puppy Dawg Posts: 2	MC54b Won't Idle Jun 20, 2012 12:46:14 GMT -5 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by searook on Jun 20, 2012 12:46:14 GMT -5 Hi all I've had a MC54B for two yrs. Have never been able to make reliably come down to and idle when driving. Usually stalls. I have raised the carb needle about 0.5 MM was a little better but still does it. I NEED HELP Thanks

wile Great Big Guru Dawg Posts: 2,269	MC54b Won't Idle Jun 20, 2012 12:51:42 GMT -5 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by wile on Jun 20, 2012 12:51:42 GMT -5 When was the last time you adjusted the Valves, Not able to hold Idle at low rpms and die is a symptom of tight valves. Set the Top Intake Valve to .004 inchs and the Bottom Exhaust to .005 inchs. Wile
	FROM THE BOOK OF KNOWLEDGE: THE THINGS YOU DO FOR YOURSELF ARE GONE WHEN YOU DIE, BUT THE THINGS YOU DO FOR OTHERS REMAIN AS YOUR LEGACY.

richardthescooter1 Great Big Guru Dawg Posts: 1,179	MC54b Won't Idle Jun 21, 2012 12:00:32 GMT -5 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by richardthescooter1 on Jun 21, 2012 12:00:32 GMT -5 Is this the needle your talking about Attachments:
	Last Edit: Jun 21, 2012 12:01:07 GMT -5 by richardthescooter1

marklorenzi: I just bought one of the Fleetwoods. They look like a clone of the Honda XRM's they sell overseas. It is in transit now and I should get it this week. I will try to post my experience here. Call me the guinea pig hahaha. Jun 2, 2013 20:29:11 GMT -5

MC54b Won't Idle

Post by searook on Jun 20, 2012 12:46:14 GMT -5

Post by wile on Jun 20, 2012 12:51:42 GMT -5

Post by richardthescooter1 on Jun 21, 2012 12:00:32 GMT -5

Shoutbox