|
|
Post by kpdiver on Jun 13, 2012 8:58:16 GMT -5
I have a 2006 Tank with a 250cc Honda Helix. I broke the center stand bracket that attaches to the cvt cover to keep the stand from rubbing on the cover when it's in the up position. Does anyone know where I could find a replacement bracket? I've done google searches and looked on ebay with no luck. Without that bracket, the stand rubs and squeaks on the cvt cover. Thanks.
KP
|
|
|
|
Post by richardthescooter1 on Jun 14, 2012 14:11:03 GMT -5
|
|
|
|
Post by kpdiver on Jun 14, 2012 18:33:41 GMT -5
Thanks for the link but couldn't find it there either.
|
|
|
|
Post by ltdhpp on Jun 14, 2012 20:33:38 GMT -5
|
|
|
|
Post by chaz12 on Jun 18, 2012 0:02:31 GMT -5
I had the same trouble with the centerstand bracket. I simply take it off during times not needed and place it back on the scooter when need to work on it. The roketa bali 250 sits on the kickstand fine.
|
|
|
|
Post by leo on Jun 18, 2012 14:51:22 GMT -5
my scoot doesn't have any kind of centerstand or sidestand bracket.
the centerstand is held tight by the spring and a rubber stop prevents rubbing.
caveat:
using your foot to ease the centerstand up will prevent it from destroying the rubber stop and knocking a hole in the engine.
at least on my bike.
|
|
|
|
Post by chaz12 on Jun 24, 2012 21:01:47 GMT -5
That is the main reason I take mine off. To stop from knocking on the crankcase. But mine has a regular kickstand also. So it makes it easy to just use the kickstand.. Now in using just the kickstand, well you got to remember to park it where it has plenty off lean.. Otherwise wind will knock it over. When working on it, it requires to be straight upright... So I place the centerstand on and put it down, so the scooter sits upright when working on it.
|
|
