Post by scootdudeman on Mar 31, 2012 3:13:56 GMT -5
2008 Xingyue/BMS Pathfinder ITA-150/XY150t/XY200t PARTS
I’m parting out my 2008 BMS Pathfinder 200 / Xingyue XY200t after only 783 miles on the clock due to a possible engine seizure. All parts are in LIKE NEW condition. The parts are compatible with Xingyue ITA-150/XY150t/ BMS Pathfinder 150. The prices do not include shipping charges. Please email me if you are interested in any parts. It is a first come first serve basis. Get them before they are gone!
Go to the link below to see pictures of the parts and prices. Whatever part you see on the website is available, if not, it has been sold.
PLEASE CHECK FOR PART AVAILABILITY AT (Always updated):
xingyue-parts.zxq.net/
Please send your parts request to: Xingyue_Parts@hotmail.com
I accept Paypal.
Here are most parts available for sale. I will be parting out the GY6 200cc (178cc) engine soon so look for more parts to be added soon. Parts will be shipped from Ohio 44111.
Speedometer (783 miles) $35
Painted Body Panels [Deal :$280 for whole 8pc set]
-White Nose panel w/front & side ventilation pieces & reflectors $40
-White Front lower panel [Wheel well panel] $35
-White Front fender $25
-White Ignition panel w/ glove box & preinstalled DC outlet (inside glove box) & helmet hook $40
-White Rear right and left side panels (Sold as set) $80 ($40 each)
-White Headlight cover $25
-White Speedometer cover w/ switches (Has predrilled holes for speakers) $25
- White Rear rack $20
-Orange rear right and left side panels (BMS sent me for last scoot) =$80 ($40 each) No decals
Black Floor panel w/ rubber plugs $35
Bottom panel (Goes underneath floor panel) =$25
-Rear Fender w/ license plate light and reflectors = $35
Rear Wheel fender (Goes above rear tire) =$15
Engine access/battery cover =$20
Engine shroud $10
-Engine mount bolt $5
Chrome muffler cover $20
MUFFLER $45
Gas tank w/ fuel sensor $35
Fuel pump $10
Canister (Hose from fuel tank attaches to this) $10
Pulse injector emission $10
Gas tank bracket $10
Gas tank cover $10
Tail light $30
Handlebar $20
Center stand w/spring $30
Headlight housing w/ stock bulb $35
Front right and left orange signal light housing $20 (Sold as a set))
Air filter system w/ air filter element & hoses $30
Mirror set (Left mirror has reverse thread) $20
Front wheel axle $5
Key set (Ignition, glove box & seat) w/ ignition wiring harness $35
Steering bolt with steering spacer $5 each (I have only 2 available)
Spacers - for rear side body panels ( For Top bolts on rear panels) $5 for set
Horn $5
Handlebar wire harness (w/ flasher) $25
Regulator $7
CDI $10
Ignition coil $10
Kickstand Kill switch $8
Main wiring harness $30
Rear swing arm $35
Front fork stem w/ shocks & bearings $65
14" OEM Rear shock set (2 shocks) $30
16" Front wheel black rim w/ silver lip & tire (100/80-16 CST Tire) w/ Brake Disc $60
16" Rear wheel black rim w/ silver lip & tire (120/80-16 CST Tire) $60
Front Hydraulic Disc Brake system $50
Kickstand w/ spring & bolt $20
Brand: President GTX7A-BS Battery (7 lbs) - fully charged & ready to ship $7
(battery is in good condition as it was always maintained by a trickle charger)
Stinger SPV20 600 watts Dry Cell deep cycle battery (16.6 lbs) Less than 1 yr old - Fully charged & ready to ship $35
Fits underneath seat nicely with room to spare! I used the battery for the stereo, LED lights and as a back-up to the scooter battery. The battery was totally independent and was charged separately every night after use. I used a digital volt meter to keep track of the voltage used.
Intake manifold $10
Kick start lever $12
SEAT $50
Seat storage box $15
1 new Sylvania Turn signal bulb $1
Fuel filter (never used) $1
Halogen bulb $2
6 pc Led Glow white LED w/ keychain remote $35
When it was installed on this scooter: www.youtube.com/watch?v=pPjMPXPu-ms&feature=plcp&context=C4a66035VDvjVQa1PpcFMTCcY5m9VLRC8Da1nY8gMZ4XUxdq0lHzQ%3D
Starter $25