|
|
Post by oxide on Sept 30, 2011 17:38:52 GMT -5
|
|
|
|
Post by imtb on Oct 1, 2011 14:24:30 GMT -5
Is that a 150? I like the scooter and the pics.
|
|
|
|
Post by oxide on Oct 2, 2011 10:45:33 GMT -5
was a 50 but its got a 70 cc athena + plenty other goodies inside, hoping to do a disc brake swap on the front over winter and gears in the spring.
thanks!
|
|
|
|
Post by ♣Luke♣ on Oct 2, 2011 17:38:21 GMT -5
my goodness oxide! where is that place?  lots of vandals....good nobody mobbed you...but anyhow,,your scoot still looks sharp... |
|
|
|
Post by oxide on Oct 8, 2011 0:59:28 GMT -5
^LOL its just a pathway with eclectic artwork no need to worry pumped i just got my front end, winter time project - disc swap in effect.  |
|
|
|
Post by oxide on Nov 8, 2011 22:00:50 GMT -5
things are going good, at a stand still, painting body panels soon and finding some other goodies for the build cosmetically plus working in the shop on other peoples rides to hopefully the new year will bring an over sized rear sheeve, variator and maybe some other goodies the parts from the Saga - Retro 50 www.sagacanada.ca/partsdetailed.php?bi=3 fit flawlessly, just had to file done the head stem from the Vino to fit into the top of the tree (it was seriously 3 swipes)   |
|
|
|
Post by oxide on Apr 8, 2012 0:39:48 GMT -5
buddy brought the inner spline shaft into work today to show me, damn some fine craftsmanship here  come on home, just another part of the build up! ended up really well.    |
|
|
|
Post by oxide on Apr 17, 2012 22:22:22 GMT -5
wheels back, new hub set in place, got some sanding to do and maybe paint but we'll see.   |
|
|
|
Post by dude on Apr 17, 2012 23:25:04 GMT -5
wheels back, new hub set in place, got some sanding to do and maybe paint but we'll see. Can you give us a little more detail. The inerspline shaft was installed in a diffirent whell how was the inershaft installed and held in place. looks like some nice looking wheels for your scoot |
|
|
|
Post by oxide on May 15, 2012 17:22:16 GMT -5
the splines for the other wheel was knocked out, i don't have measurements but it was way bigger than the original Vino, the Vino one was press fitted so there was no way to recover it and use it again in the new wheel unfortunately some updates. thanks to some fine cuttin' action FTJ i got the fender fitted. she's a comin'!  |
|
|
|
Post by oxide on May 19, 2012 23:50:28 GMT -5
still lots to do, retuning probably, JDM headlight, custom seat but its coming together.  |
|
|
|
Post by oxide on May 26, 2012 9:26:25 GMT -5
things have come to a halt after the first test run, the crankshaft is toast and the case is coming apart! my fault as i run pre mix and i actually ran one whole 20L Gas can without oil, silly eh?
yup, onwards and upwards now!
|
|
|
|
Post by chromestarhustler on May 26, 2012 10:53:45 GMT -5
you selling the stock vino top end?
|
|
|
|
Post by oxide on May 28, 2012 21:29:06 GMT -5
^do you mean the headlight cowl? here's some nasty pics    |
|
|
|
Post by oxide on May 30, 2012 18:05:36 GMT -5
well to change topics my JDM headlight came in so its all good to go along with a wicked HID kit, pictures from the cell suck so i'll be sure to take better ones soon  |
|
|
|
Post by oxide on Jun 19, 2012 21:52:13 GMT -5
|
|
|
|
Post by oxide on Oct 5, 2012 17:41:45 GMT -5
so the next project, purely cosmetic will be to get my halo inside the headlight a lil baking...ya mon! and all should be good  |
|
lots of vandals....good nobody mobbed you...but anyhow,,your scoot still looks sharp...
