|
Post by redbeans on May 28, 2009 10:11:36 GMT -5
I want to disable the rev limiter on my Roketa 50cc. I saw the link to cut the pink wire, but I do not see a pink wire on the right side of my scooter.
|
|
|
Post by rapidjim on May 28, 2009 11:12:57 GMT -5
If there isn't a pink wire to cut then you have to change the CDI to a non rev type. I do carry those, if you are interested PM me.
|
|
|
Post by redbeans on May 28, 2009 14:22:03 GMT -5
Where is the CDI? Is it underneath near the battery?
|
|
|
Post by rapidjim on May 28, 2009 15:02:39 GMT -5
It should be or just below the seat bucket.
|
|
|
Post by redbeans on May 28, 2009 20:48:18 GMT -5
What is the best way to get to it?
|
|
|
Post by rapidjim on May 29, 2009 8:10:28 GMT -5
If you open the battery compartment it should be right there, if it is on the frame then you have to remove the seat bucket, open your seat and remove the 4 retaining nuts or bolts, 2 should be in the bottom of the bucket and 2 should be at the rear on top. Remove the phillips head screw near the seat if equipped, then lift the seat and bucket of the scooter. The cdi should be on the frame rail, usually left side.
|
|
|
Post by redbeans on May 29, 2009 12:00:00 GMT -5
Thanks
|
|
|
Post by ventooo on Jun 3, 2009 12:53:20 GMT -5
does anyone know if baja sc50's have rev limiters? And does anyone know if 150cc cdi's would work on a 50cc
|
|