|
|
Post by maydog on May 12, 2009 8:58:51 GMT -5
Here is a quick one, it looks like my rear axle nut fell off. I need to replace it but I could not find a replacement after quick search online. Is this a part that I can find a replacement for at a hardware store?
|
|
|
|
Post by earlwb on May 12, 2009 13:49:36 GMT -5
it should be a M14 or 14mm Nut. Thread size is common, so that shouldn't be a problem. www.roketa.com has parts lists and stuff for most all the scooters. There is a washer that goes with the nut too. You'll need a washer as well. it serves as a spacer for the nut. it fits insidethe bearing so that it all rotates when the wheel it turned. |
|
|
|
Post by maydog on May 12, 2009 21:55:34 GMT -5
Thanks, I was able to find a 14mm nut at a local hardware store. I installed it with some locktite before I read your post. It seems to work ok without the washer as a spacer.
But, now my ignition coil exploded - but that is another post.
|
|
