|
Post by "Big Guy" on May 16, 2008 18:18:59 GMT -5
Hi Allworld, Yes, those are good ideas and again, this is a work in progress. There are a few more pages I'm working on right now, but I'm waiting for my next crate scooter or someone who wants a free PDI in the area so I can update all of the pics. There will be a bunch more added before long. I prematurely announced it in a post a while back and kept getting PMs saying, "please send me what you have done so far", so I got tired of copying and pasting I hope to have it revised and finished by the end of July or so. A lot of the newer scoots come with air filters that don't require oil, so before you go out and buy any, check first! Enjoy! -Rich
|
|
|
Post by "Big Guy" on May 16, 2008 18:23:26 GMT -5
...My question is, is this very far off from the dimensions you are suggesting (for example, i know 4/16 = 1/4)? would those sizes be okay? what difference would the differing sizes create, if any? Thanks. Yes, they work fine, just change to screw clamps. If you prefer, you can cut an inch off both lines from the scoot and bring it with you for an exact match in size and remain stock, but going 1/4" will work fine with the right clamps. I have always done it and never had a problem. -Rich
|
|
|
Post by allworld on May 16, 2008 19:16:42 GMT -5
Big Guy: you should have a printable sticker similar to "Kilroy was here" so other Dawgs know the scooter sporting the sticker has had a complete PDI.
|
|
|
Post by "Big Guy" on May 17, 2008 14:36:24 GMT -5
;D That's a good idea! Kilroy was Here is an ambiguous statement, in that, was it Kilroy, or some other troop... so what do you think it should say? X1 Certified? No, that sucks... it would have be creative, which I am not. For those of you who don't know the saying, here's a link to the legend explaining it. -Rich
|
|
|
Post by Aaron on May 17, 2008 14:41:24 GMT -5
Rich can we move this to the best of and sticky it? Would that be cool with you?
Aaron
|
|
|
Post by "Big Guy" on May 17, 2008 20:29:42 GMT -5
Sure Aaron, that would be fine, thanks.
-Rich
|
|
|
Post by pentode on May 17, 2008 22:16:23 GMT -5
This will be a lot of help to a lot of people Rich !!. What is the Maroon scoot at the head of post ?..Spiffy !!
|
|
|
Post by "Big Guy" on May 17, 2008 23:23:14 GMT -5
Hi,
That's a model I'm currently working on importing and calling the X1-BW150. In Asia, it's the ONAM 150-R, but currently, not for sale yet in the US. They are working on the DOT/EPA paperwork and about 15 custom mods for me, everything from chrome to carb. It has a 16" front wheel and an 18" wide profile rear, and it'll be available in a 150, 180 & 200cc model.
-Rich
|
|