|
Post by Rustynuts on Feb 24, 2013 6:35:00 GMT -5
Hey guys.
Im about to adjust the valves on a GY6 150cc engine and from all the info on the net people say to adjust the Intake too .004 and the Exhaust too .005.
Well iv been out and bought some feeler gauges and got back home to find out that the kit iv bought doent have .005. It has .004 and .006.
Iv never adjusted valves before so please excuse my noobiness. But is it safe to adjust them both too .004 or adjust the exhaust too .006? Or do i really need to take this kit back and get a set with a .005 on.?
Thanks in advance.
|
|
|
Post by payneib on Feb 24, 2013 6:40:30 GMT -5
Does it have a .001? Or even a .003 and a .002? You can mix and match with feeler gauges to get the right setting. Failing that, I'd say just set it to .004, it'll probably still be better than it is now.
|
|
|
Post by payneib on Feb 24, 2013 6:42:57 GMT -5
Crappy internet connection making me double post.........
|
|
|
Post by Rustynuts on Feb 24, 2013 7:45:15 GMT -5
OMG what a noob i feel, i never thought too combine the .002 and .003 hahahahahahah
Thanks
|
|
|
Post by ericrockstar on Feb 24, 2013 8:36:37 GMT -5
Just use .003 on both. It's not as loud.
|
|
|
Post by Rustynuts on Feb 24, 2013 9:13:30 GMT -5
All sorted now. .004 On intake and .005 on exhaust. Fired up first time and runs like a dream.
Thanks guys.
P.s Im not usually this thick, no idea why i didnt think to add them together hahahaha
|
|
|
Post by greenenergy on Feb 27, 2013 7:45:50 GMT -5
.004 is this a MM or Inch?
|
|
|
Post by ericrockstar on Feb 27, 2013 7:50:40 GMT -5
Inch
|
|