|
|
Post by glennb on Dec 30, 2008 21:09:36 GMT -5
Does anyone out there know how to,what to remove to replace the rear tail light bulb on a 2008 50cc scooter. The fuel tank sits next the the light, is there a thread with pics and is there a american bulb that will fit, its brake and tail light. I dont know if the bulb has offset pins or even pins. HELP HELP, Thanks to all of you who have come to my rescue in the past. The scooter is a SC 59 that ATV Discounters sell,and it looks like the Roketa Maui
|
|
|
|
Post by Enviromoto on Dec 30, 2008 21:40:25 GMT -5
The easiest way to remove the tail light is by removing the red plastic cover on the tail light assembly. You should see some small screws under the black cover piece above the license plate holder. I have the bulb in stock. enviromoto.ecrater.com/product.php?pid=3642290 |
|
|
|
Post by erictheviking666 on Dec 31, 2008 0:55:39 GMT -5
Thats the same Scooter I have. I was wondering how I was gonna get that thing off. I just looked at mine and I saw 2 screws and possibly 2 nuts by the reflector that may have to be removed also. I want to replace mine with an LED bulb.
|
|
|
|
Post by glennb on Dec 31, 2008 6:32:10 GMT -5
That is the same as mine, it appears that there are 2 bulbs a brake light and a running light bulb, because the bulb picture that enviromoto sent shows a single element/single post bulb
|
|
|
|
Post by indy50 on Dec 31, 2008 13:19:48 GMT -5
If yours is a dual element like my Roketa Maui, then any ol' 1157 automotive bulb should work. eric, Most truck stops have led's on hand. A lot cheaper than tho ones I've seen online. Got mine for 6.99
|
|
|
|
Post by erictheviking666 on Dec 31, 2008 23:13:31 GMT -5
Ahh Truckstop, I never thought of that! Thats a good idea, I'm gonna go check that out. Indy50 have a bone for that idea!
|
|
|
|
Post by Troll on Jan 6, 2009 8:19:37 GMT -5
Thats the same Scooter I have. I was wondering how I was gonna get that thing off. I just looked at mine and I saw 2 screws and possibly 2 nuts by the reflector that may have to be removed also. I want to replace mine with an LED bulb. It's easy just take off the two screws and you'll kinda see what else you need to remove to get it off. It's just like mine. |
|
