|
Post by dogmeat on Jan 10, 2009 10:09:04 GMT -5
For some time now my starter has worked fine but made a horrible wirrrrrrrrrrr noise when used. I decided to unbolt it and see whats going on inside. I took a few pics just in case anyone wanted to see for themselves. Once I cleaned all the crap out it looked a bit better inside. I gave the contacts a rubdown afterwards to improve contact. Well there it is back together. Once I greased it up and mounted it back on my bike the nasty noise had gone.
|
|
|
Post by Riddick79 on Jan 10, 2009 12:22:44 GMT -5
How did you even remove it? I tried removing mine a while back and I couldn't get it off. I removed 2 bolts and tried jiggling and prying, but nothing worked so I gave up.
|
|
|
Post by dogmeat on Jan 10, 2009 13:35:32 GMT -5
How did you even remove it? I tried removing mine a while back and I couldn't get it off. I removed 2 bolts and tried jiggling and prying, but nothing worked so I gave up. Yeah it took me a while to work out too. You were right to remove the two bolts then i used a rubber mallet to tap it backwards, the rubber seal was quite stiff. Then all you have to do is unscrew the power connection.
|
|
|
Post by shookupart on Jan 10, 2009 21:48:03 GMT -5
cool thread and nice pics. Ive seen this at the scooter shop...heard the noise you described and the customer paid for a new starter. you made saving money look easy. thanks
|
|
|
Post by cathouse on Jan 10, 2009 22:21:51 GMT -5
Did you clean it up with some fine sand paper ? It looked normal to me.
|
|
|
Post by dogmeat on Jan 11, 2009 9:45:37 GMT -5
Did you clean it up with some fine sand paper ? It looked normal to me. Whats bit are you refering to? If you mean the copper contacts then yes I used some wire wool.
|
|