|
Post by swakk on Jun 15, 2008 16:28:58 GMT -5
i'll have some electric work on my scoot as soon as possible (maybe this week) to put a cold cathode tube for the rear lights to improve the wattage available for my front lights (35+50w) so i'll try to check thoses wires for you if i have enought time to help people to do this job for reference yellow (3) =from stator ac unregulated white: 2.26 v to 5.5 (depend of ? forgotten utilisation maybe starter?) red: 14.43v i think it's battery black: 14.43v for my own i think i use it as alimentation for i don't remember what green: -0v it's ground i have this regulator for the 11 coil , around 150w output i had this one for the 6 coil around 75 w output the stators link to the intervention (partially in french) www.scooterchinois.fr/modules/newbb/viewtopic.php?topic_id=939&forum=54completly rewired with neat connections as original if some people here can write the use of the output wires of the regulator ? because i don't write it so interested people won't be able to do this until i open again my scoot...
|
|
|
Post by gy6rocket on Jun 15, 2008 17:43:47 GMT -5
Thank you for helping me out swakk +1 Karma from me.
I will have the new 7 wire regulator this week, I will hook it up and post my meter readings from the output side of the regulator.
The 11 coil stator really is a nice upgrade, its how Honda originally designed it.
What do you mean by "alimentation?"
|
|
|
Post by swakk on Jun 16, 2008 1:32:29 GMT -5
hé hé, weak english ! it's to feed something, so i use it to power things, if i remember well. please follow the link i gave, i added some more information and a schematic, but for a rectifier with one wire less (white)
|
|
|
Post by gy6rocket on Jun 16, 2008 7:53:31 GMT -5
Thanks swakk, I followed the wiring diagram on your link and it shows that the black wire is indeed hooked up to the + ignition side. I do believe its a battery voltage sensor so that the battery does not get overcharged. Thanks for the diagram, very useful.
I also am bidding on a couple genuine Honda regulators, one is a 6 pin just like your wiring diagram.
|
|
|
Post by swakk on Jun 17, 2008 8:30:35 GMT -5
i checked what i did
white one is for starter, around 6 volt dc red for battery green for ground black to power things (lights, meters....)
all the yellow are phases from stator (3)
i added a pc fan on the rectifier, because it's warming a lot with my powerfull lights
|
|
|
Post by swakk on Mar 2, 2009 15:48:45 GMT -5
|
|
|
Post by kink on Mar 3, 2009 13:20:04 GMT -5
I'm going to be doing the 6 to 11 pole stator swap shortly. I'm sure I'll be asking you guys a few wiring questions when I get all the parts in.
|
|