|
|
Post by timk225 on Mar 24, 2012 23:57:30 GMT -5
I have a Jonway YY250T scooter (Viva MP250RO, Honda Reflex clone), and I can't see where the oil fill and drain bolts are for the rear gearbox at the rear wheel. They have GOT to be here somewhere, anyone got photos?
I saw a photo of the drain bolt coming out at an angle on the bottom of the case, but mine doesn't have any bolts there.
|
|
|
|
Post by wile on Mar 25, 2012 0:22:30 GMT -5
its a pita you have to take the CVT cover off:
Wile
Here you go found a Video:
|
|
|
|
Post by varisangel on Mar 25, 2012 0:23:48 GMT -5
x1scooters.com/pdi.htmlAbout 4/5 of the way down under "Gear Oil Change". I have a YY250T on my Roketa, so I'll assume its the same. From what I recall on changing mine, you take off the CVT cover to the transmission, find the 2 bolts with copper/brass washers. The drain bolt it was easy to spot the washer, the fill bolt was larger than the washer and harder to spot.
|
|
|
|
Post by leo on Mar 25, 2012 0:29:44 GMT -5
caveat:
drain and fill on the centerstand.
placing the front wheel on the ground will allow you to add about 10% more fluid.
placing the rear wheel on the ground will allow almost all of the fluid to drain.
draining while hot makes the job a lot quicker.
fill until fluid runs out of the fill hole.
some recommend gear lube.
the elite manual says you can use 10W40 API SE,SF.
i use 90 weight gear oil.
|
|
