|
|
Post by boopscoot on Apr 24, 2011 16:00:51 GMT -5
bought wrong cdi my scoot is a jinlun jlqt-50 .I just insialled new 80cc bbk,high performance coil, and free flow carb airfilter, and a racing ngk plug. I still need a color code or wiring diagram for casoli 6pin gold series. However my scoot is only a 5 pin cdi. Can anyone please help?
|
|
|
|
Post by sprocket on Apr 24, 2011 16:31:48 GMT -5
Might try the forum of 50cc scooters? There are two types of CDIs AC and DC. You need to know what you have. As far as I know all CDIs have two plugs one with 4 pins and one on the right with two pins... www.scootertronics.com/scootercdi.htmlAttachments:
|
|
|
|
Post by edfr on Apr 24, 2011 17:05:53 GMT -5
This may help some have TWO ground wires others have one also if on the TWO pin Plug you only have 1 wire you may have a DC system. But if it has two wires on the TWO pin Plug and 3 on the other just match the 123 wireing on your existing plug. Lefty  |
|
|
|
Post by boopscoot on Apr 24, 2011 18:26:17 GMT -5
i have stock cdi in now. it has standard color code . casoli has 2 green wires, gnd? 1 red wire, trigger, a blue? and a yellow coil this is all i can figure out . she turns over as soon as i hook up red on casoli to red white on my scoot the rest is confusing
|
|
|
|
Post by sprocket on Apr 24, 2011 18:40:51 GMT -5
Perhaps this will be of aid Attachments:
|
|
|
|
Post by boopscoot on Apr 24, 2011 19:00:10 GMT -5
thanks dawg but heres my situation. here are wire colors for casoli and my scoot maybe you can help.
CASOLI
2 green
1blue
1red
1yellow
1black
MY SCOOT
grn-gnd
blue/yl-coil
black/rd-stator
black/wh-kill switch
rd/wh-trigger. These wires run now with stock cdi. anything will help
|
|
|
|
Post by edfr on Apr 24, 2011 19:21:56 GMT -5
This has to help, POSITIONS on the CDI do not change just the color of the wires might. Lefty  |
|
|
|
Post by boopscoot on Apr 24, 2011 19:27:12 GMT -5
plug is missing. I dont know which color wires on casoli are what. I have searched internet ruthlessly to no avail. Cant locate a wiring diagram.hope i didnt waste 50 bucks
|
|
|
|
Post by sprocket on Apr 24, 2011 19:31:02 GMT -5
Here is the plug for the Casoli gold. It is the same as the standard CDI I don't see what the problem is. Don't worry what the colours are on the Attachments:
|
|
|
|
Post by sprocket on Apr 24, 2011 19:36:58 GMT -5
Here is the plug. The 2 plug is black and red. Figure that green is ground So you just have to figure the blue and yellow Attachments:
|
|
|
|
Post by boopscoot on Apr 24, 2011 19:40:55 GMT -5
my plug has been cut off the casoli, but I think i remember where they were on plug .
|
|
|
|
Post by edfr on Apr 24, 2011 19:43:54 GMT -5
Yellow would be the Coil Feed position 2 and Blue is the Trigger position 1.
3-4 are ground and 5 is the Kill Switch and the Red is the Power Feed 6.
Lefty
|
|
|
|
Post by sprocket on Apr 24, 2011 19:46:30 GMT -5
keep looking Attachments:
|
|
|
|
Post by sprocket on Apr 24, 2011 19:48:23 GMT -5
If there are two green wires they go to the two bottom terminals on the 4 plug Attachments:
|
|
|
|
Post by boopscoot on Apr 24, 2011 21:39:10 GMT -5
big thanks to all that helped !!! boopscoot is on the road with new computer. mid range really increased. dont know about top end its starting to rain.now for new rollers and possibly bigger jets for my bbk.
|
|
