|
|
Post by 50scoot on Feb 1, 2013 21:07:44 GMT -5
Lookin for the best deal on an a9 cam or equivalent for my 50cc, scrappy seems to be the best deal and there shipping speed is awesome.
Anyone know of coupons available for anyone?
suggestions?
|
|
|
|
Post by millsc on Feb 1, 2013 22:30:32 GMT -5
|
|
|
|
Post by rickmain on Feb 2, 2013 20:57:22 GMT -5
Scrappy is in stock on Taiwanese a9 cams
|
|
|
|
Post by rickmain on Feb 2, 2013 21:04:58 GMT -5
|
|
|
|
Post by millsc on Feb 2, 2013 21:23:26 GMT -5
wow never knew, will never buy from him again!
|
|
|
|
Post by mwlehman on Feb 4, 2013 12:21:30 GMT -5
Did you notice a difference in the cam? Both my wife`s and my scooters have 80cc kits, orange CDI, aftermarket exhaust, airfilter, rejetted of course. they both run well now but I am always looking to play
|
|
|
|
Post by millsc on Feb 4, 2013 12:23:32 GMT -5
The cam is actually awesome, it was a great buy, its bigger than the stock cam and it does lower the rpms some after i dialed in the weights it performs much better its worth buying.
|
|
|
|
Post by mwlehman on Feb 4, 2013 19:59:55 GMT -5
Thanks! I guess now I know that, I will have to order 2 cams
|
|
|
|
Post by rickmain on Feb 4, 2013 23:40:23 GMT -5
|
|
|
|
Post by oo4load on Feb 6, 2013 2:37:44 GMT -5
Those cams are as chinese as they get. All the parts he sells are from the same chinese supplier, there is nothing taiwanese about it. Yes the supplier uses the name "taiwan", but it's fake.
The cams don't have a higher lift than the original (they are not visibly different from the original cam). They may be different in timing though, dont have the tools to measure it. They could be copied from the NCY 50cc cam.
A9 is a 125cc cam so it would be unsuitable for the 50cc head anyway. This is not an A9 cam.
|
|
|
|
Post by millsc on Feb 6, 2013 8:40:45 GMT -5
my a9 cam was visibly bigger than my stock cam, it does have a higher lift i measured, did lower the rpms by about 500 and says taiwan tomos racing on it or something like that. No matter where it came from or whatever it works much better than the stock cam. Do you have the cam?
|
|
|
|
Post by oo4load on Feb 7, 2013 4:15:35 GMT -5
Yes I have those cams (text is Tomax Racing on the cam), I also sell parts from that chinese exporter. I could not measure a difference in lobe height between the standard Kymco cam, the Tomax cam and an NCY cam. Could be yours is a different series of the cam, as they may sometimes change the supplier of the their parts. (whichever one is cheaper or in stock at the factory)
I also have 125cc cams, and they have A8/A9 etc.. marks. They wouldn't fit in a 50cc head though.
|
|
|
|
Post by millsc on Feb 7, 2013 9:42:34 GMT -5
Mine is bigger than stock and was an improvement, i have a china scoot though not a kymco
|
|
|
|
Post by imnts2 on Feb 7, 2013 19:48:30 GMT -5
Put simply. Anyone can say most anything here. When you talk about fines, I wonder who is issueing fines. I have never seen a supplier take sides either. Why should they? I have always found a retailer who bad mouths his competition needs to be watdched carefully too.
Looks like all the best venders have been driven off this site. Sorry tosee that
Lefty2
|
|
|
|
Post by mwlehman on Feb 8, 2013 18:03:38 GMT -5
just ordered 2 cams and 2 orange coils from scrappydawg..we will see. so far both scooters are modified the same, 50mm bbk, pipes, airfilters, cdi, 1500 torque springs... but my wife can still whoop me..I never hear the end of it..lol
|
|
|
|
Post by millsc on Feb 8, 2013 18:05:47 GMT -5
The cam will lower your rpms, you may have to go slightly lower on your weights.
|
|
|
|
Post by mwlehman on Feb 8, 2013 20:54:44 GMT -5
Do they add more torque? how exactly does the scooter perform differently from stock cam
thanks
Mike
|
|
|
|
Post by millsc on Feb 8, 2013 21:05:25 GMT -5
For me its stronger torque and midrange power greatly increased.
|
|
|
|
Post by mwlehman on Feb 9, 2013 7:39:05 GMT -5
again, thank you. that was the kind of answer I was looking for. I went from a 350-10 rear tire to a 120/90-10 hoping to get more mph but my scoot will not pull it....real sluggish take off and just gets to about 7500 and will not turn any more rpm..my wife really lets me sit..i hear her laughing and she is pulling away..she is not very nice LOL
|
|
