ScootDawg Scooter Forum

« ring help »

Welcome Guest. Please Login or Register.
May 24, 2013, 3:36am

ScootDawg Scooter Forum :: The Garage :: 50cc Scooters and up.... :: ring help

Author

Topic: ring help (Read 138 times)

david3336
Great Big Dawg

member is offline

Joined: Jun 2011
Gender: Male

Posts: 102
Location: virginia

ring help
« Thread Started on Aug 18, 2012, 12:52am »

I need to know on the 80 bbk from scrappy what ring is the top one and is it any markings on the rings that show what side of the ring is up

Link to Post - Back to Top IP:

Logged

1-sunny 50cc yy50qt-6
1000 torque sping
ngk iridium plug set at 0.6mm
orange perf. cdi and coil
5.2 gram rollers
93 octane gas
43mph top speed (GPS)
120 mpg

2-2008 peace sports
83cc bbk
big bore head
a9 cam
20mm carb
6 gram rollors
modded stock air box and muffler
stock idle and 88 main jet
custom paint job
93 octane gas
top speed -53 mph
90 mpg

OverReved
Great Big Guru Dawg

member is offline

[avatar]

Joined: Jul 2012
Gender: Male

Posts: 705
Location: North Carolina

Re: ring help
« Reply #1 on Aug 18, 2012, 12:59am »

Install oil control ring first, then the second ring then the top ring.
The ring pack is usually stacked from top to bottom before you open it.
If you need to figure it out because you pulled it all out of the pack then the thickest shiny ring is the top one. There's usually a circle marking near the cut part of the ring and this indicates the top side of the ring.
The darker colored ring is the second ring.
The oil control ring, install the wavy ring then slide the two thin scraper rings on and into the grove on the oil control ring.

Link to Post - Back to Top IP:

Logged

onewheeldrive
Great Big Guru Dawg

member is offline

[avatar]

Joined: Jul 2009
Gender: Male

Posts: 474

Re: ring help
« Reply #2 on Aug 18, 2012, 1:02am »

I'd send them an email tonight and ask them. The rings on my stock 50cc top end rebuild (from scrappy) were marked, but not all rings are the same and are marked differently. I've bought rings before that nearly identical, if not identical, with no markings.

« Last Edit: Aug 18, 2012, 1:05am by onewheeldrive »

Link to Post - Back to Top IP:

Logged

GOLDEN RULE: Never replace anything until a valve adjustment is done---besides the obvious.

Tank sporty 50cc QMB139

david3336
Great Big Dawg

member is offline

Joined: Jun 2011
Gender: Male

Posts: 102
Location: virginia

Re: ring help
« Reply #3 on Aug 18, 2012, 1:05am »

Thanks

Link to Post - Back to Top IP:

Logged

mainepeace
Great Big Guru Dawg

member is offline

[avatar]

Mainely Scooters!!!

Joined: Jul 2010
Gender: Male

Posts: 5,894
Location: Mainely Scooters

Re: ring help
« Reply #4 on Aug 18, 2012, 5:46pm »

I have installed many Scrappy 80cc kits. The rings are not marked and it doesn't matter which side is up. Just clock the rings and you will be fine.

Greg

Link to Post - Back to Top IP:

Logged

I DO NOT RESPOND TO PMS - EMAIL THE SHOP PLEASE!

Peace Sports, Tao Tao and Roketa Dealer

Like us on FACEBOOK

Amazon: http://Amazon.com/shops/MainelyScooters
Maine Website: http://MainelyScooters.com

Click Here To Make This Board Ad-Free